Abstract:Transparent conductive oxides (TCOs) are highly desirable for numerous applications ranging from photovoltaics to light-emitting diodes and photoelectrochemical devices. Despite progress, it remains challenging to fabricate porous TCOs (pTCOs) that may provide, for instance, a hierarchical nanostructured morphology for the separation of photoexcited hole/electron couples. Here, we present a facile process for the fabrication of porous architectures of aluminum-doped zinc oxide (AZO), a low-cost and earth-abundant transparent conductive oxide. Three-dimensional nanostructured films of AZO with tunable porosities from 10 to 98% were rapidly self-assembled from flame-made nanoparticle aerosols. Successful Al doping was confirmed by X-ray photoemission spectroscopy, high-resolution transmission electron microscopy, elemental mapping, X-ray diffraction, and Fourier transform infrared spectroscopy. An optimal Al-doping level of 1% was found to induce the highest material conductivity, while a higher amount led to partial segregation and formation of aluminum oxide domains. A controllable semiconducting to conducting behavior with a resistivity change of more than 4 orders of magnitudes from about 3 × 102 to 9.4 × 106 Ω cm was observed by increasing the AZO film porosity from 10 to 98%. While the denser AZO morphologies may find immediate application as transparent electrodes, we demonstrate that the ultraporous semiconducting layers have potential as a light-driven gas sensor, showing a high response of 1.92-1 ppm of ethanol at room temperature. We believe that these tunable porous transparent conductive oxides and their scalable fabrication method may provide a highly performing material for future optoelectronic devices.

Effects of Thallium–Aluminum‐Codoped Zinc Oxide Thin Film as a New Transparent Conducting Oxide

Effect of Film Thickness on Properties of Al-Doped Zno Film As Transparent Conducting Electrodes in Oleds

Optical and structural properties of Al-doped ZnO thin films by sol gel process

Synthesis of Al-doped zinc oxide nano particle TCO material by simple Sol-Gel method

Enhanced Sol–Gel Route to Obtain a Highly Transparent and Conductive Aluminum-Doped Zinc Oxide Thin Film

A Comparative Study of Growth and Properties of Atomic Layer Deposited Transparent Conductive Oxide of Al Doped ZnO Films from Different Al Precursors

Substitution of transparent conducting oxide thin films for indium tin oxide transparent electrode applications

Improvement of Transparent Conductive Properties of GZO/Cu/GZO Tri-Layer Films by Introducing H2 into Sputtering Atmosphere

Synthesis of ZnO:Al Transparent Conductive Thin Films Using Sol-gel Method

Investigation on Transparent, Conductive ZnO:Al Films Deposited by Atomic Layer Deposition Process

High Haze and Low Resistive MgO/AZO Bi-layer Transparent Conducting Oxide for Thin Film Solar Cells

Single Crystalline Transparent Conducting F, Al, and Ga Co-Doped ZnO Thin Films with High Photoelectrical Performance

Tuning of Electrical and Optical Properties of Tantalum Doped TiO2 Flims Prepared by Sol-gel Method

Progress in the Synthesis and Application of Transparent Conducting Film of AZO (ZnO:Al)

One-Step Synthesis of Porous Transparent Conductive Oxides by Hierarchical Self-Assembly of Aluminum-Doped ZnO Nanoparticles

Enhanced Electrical Properties of AZO/IZO Multilayered Thin Film with Post Laser Annealing Process

Transparent conducting molybdenum-doped zinc oxide films deposited by RF magnetron sputtering

A Comprehensive Investigation of the Mechanical and Tribological Properties of AZO Transparent Conducting Oxide Thin Films Deposited by Medium Frequency Magnetron Sputtering

Study on Aluminum Concentration on Optical and Electrical Properties of AZO Thin Films Fabricated by Ultrasonic Spray Pyrolysis

The Effect of Transparent Conducting Oxide Films on WO3-Based Electrochromic Devices with Conducting Polymer Electrolytes

Effect of aluminum doping on zinc oxide thin films grown by pulsed laser deposition for organic light-emitting devices