Abstract:Previously we have found that (NbTaZrW)C exhibits a good combination of nanohardness and toughness. In this report, we explore the possibility to further increase the overall properties of this high entropy carbide ceramic (HECC) through introducing SiC particle (SiCP). To this end, a series of (NbTaZrW)C‐xSiC ceramic composites (x = 0/5/15/30/50 vol.%) were fabricated using spark plasma sintering (SPS), their microstructure and mechanical properties were characterized. Our results reveal a grain refinement effects of SiCP, an agglomeration of SiCP with (100) plane preferentially perpendicular to the SPS‐pressing direction and the formation of a transition region with various stoichiometric ratio of (NbTaZrW)xC1‐x in the (NbTaZrW)C‐SiCP vicinity. The elastic modulus, microhardness and flexural strength of the HECCs show tight positive relations with the SiCP content and the beneficial effect of SiCP to the fracture toughness of (NbTaZrW)C becomes evident once the content of SiCP reaches 30 vol.%. Altogether, (NbTaZrW)C‐50%SiC, which has a microhardness of 22 GPa, a flexural strength of 455 MPa and an indentation fracture toughness of 6.54 MPa·m1/2, presents the optimal combination of mechanical properties among the investigated composites. Mechanistically, the strengthening effect of SiCP introduction arises from the intrinsic high hardness of SiCP and the SiCP‐induced grain refinement and the toughening effect is mainly associated with crack bridging mechanism. This article is protected by copyright. All rights reserved

Spark plasma sintering and improved fracture toughness of silicoboron carbonitride ceramics with the integration of 2D MXene

A pinning effect for the enhanced oxidation resistance at 1600 °C of silicoboron carbonitride ceramics with the addition of MXene

Enhanced strength and toughness of SiC/C composite ceramics via SiC@graphene core–shell nanoparticles

Microstructure and tribological behavior of Ti3C2Tx MXene reinforced chemically bonded silicate ceramic coatings

MXene-toughened Al2O3 ceramic at high temperature

Microstructure and mechanical properties of SiC composite ceramics modified by (TixZr1–x)B2 solid solution

Study on the toughening mechanism of in-situ synthesis (TixZr1−x)B2 in solid-state sintered SiC composite ceramics

High toughness Si3N4 ceramic composites synergistically toughened by multilayer graphene/β-Si3N4 whisker: Preparation and toughening mechanism investigation

Effects of Ti on the Microstructural Evolution and Mechanical Property of the SiBCN-Ti Composite Ceramics

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Microstructures and mechanical properties of high-entropy (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C ceramics with the addition of SiC secondary phase

Microstructure and mechanical behaviour of transient liquid phase spark plasma sintered B4C–SiC–TiB2 composites from a B4C–TiSi2 system

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Study on the mechanical properties and microstructure of Al2O3/nano-SiC multiphase ceramics

The Effect of CNTs on the Spark Plasma Sintering Densification Behavior and Mechanical Properties of B4C-Si Powders

Simultaneous hardening and toughening of a high entropy (NbTaZrW)C ceramic carbide using SiC particle

Enhanced strength and toughness of silicon carbide ceramics by graphene platelet-derived laminated reinforcement

Microstructure, mechanical properties and thermal conductivity of (Ti0.5Nb0.5)C–SiC composites

Microstructure and fracture toughness of SiAlCN ceramics toughened by SiCw or GNPs

Spark plasma sintering of TiC-based composites toughened by submicron SiC particles

Fabrication and mechanical properties of Al2O3–TiC ceramic composites synergistically reinforced with multi-walled carbon nanotubes and graphene nanoplates