Abstract:In this paper, a well designed experimental study comprising undrained cyclic triaxial and bender element tests was carried out on five sand-silt mixtures with three grain size ratios ( R d ) and three sand uniformity coefficients ( C us ). The results reveal that at given fines content (FC) and void ratio, the liquefaction resistance (CRR) of the mixtures decreases as R d increases from 9.7 to 27.8 or C us from 1.50 to 4.46, and the CRR of the mixture at the highest R d or C us becomes as low as nearly 50% of that at the lowest R d or C us . The equivalent relative density ( D r *) based on the binary packing theory can be utilized to capture the coupled effects of host sand gradation and FC on the CRR of sand-silt mixtures. A novel finding is that a universal relationship exists between the liquefaction resistance and the shear modulus normalized by the minimum void ratio function of host sand ( G N ') for different FCs, initial effective confining pressures, sample preparation methods (SPMs), and host sand gradations. Based on the comprehensive laboratory test data, the empirical CRR 15 - G N ' correlation is proposed and further adjusted for the field liquefaction triggering analysis based on the shear wave velocity (V s ). Soil can be considered non-liquefiable when its equivalent shear wave velocity exceeds 225 m/s or the applied cyclic stress ratio (CSR) is below 0.088. Comparisons with the previously established liquefaction triggering boundary curves validate the applicability of the proposed curve for initial evaluation of the liquefaction resistance of sandy soils, indicating laboratory studies can complement in-situ investigations for V s -based liquefaction assessment.

Influence of Low Silt Content on the Anisotropic Behaviour of Sand

Cyclic Flow Behavior of Anisotropically Consolidated Sand with a Small Amount of Fines

Signature of Anisotropy in Liquefiable Sand under Undrained Shear

Energy-based Assessment of Cyclic Liquefaction Behavior of Clean and Silty Sand under Sustained Initial Stress Conditions

Experiment of initial relative density effects on sand strength

Influences of fines content on cyclic resistance ratio of fines-sand-gravel mixtures

Influence of fines and gravel particles on strength-dilatancy of river sand: Effect of depositional conditions

Undrained shear behavior of silty sand with a constant state parameter considering initial stress anisotropy effect

Effect of Anisotropic Stress State on Elastic Shear Stiffness of Sand–Silt Mixture

Effect of fines on liquefaction resistance of sand

Effect of non-plastic marine silt on physical and mechanical properties of Konarak carbonate sand

Effect of Fines Content on the Compression Behavior of Calcareous Sand

Comparison of Cyclic Liquefaction Behavior of Clean and Silty Sands Considering Static Shear Effect

Anisotropic behaviors of calcareous sand dependent on loading direction and initial shear stress

Factors Affecting Small-Strain Shear Modulus of Sand–Silt Mixture Considering Different Moisture Contents

Wetting characteristic and flow behavior of silicate binder at various sand particle-particle interfaces: Fine or coarse, circular or angular particles

Experimental Study on Asymptotic Behaviour of Anisotropic Sand

Undrained Response and Liquefaction Resistance of Sand–Silt Mixtures

Influence of Particle-Size Disparity on Cyclic Liquefaction Resistance of Silty Sands

Liquefaction resistance and small strain stiffness of silty sand: Effects of host sand gradation and fines content

Determination of the Effect of Soil Particle Size Distribution on the Shear Behavior of Sand