Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Modulation bandwidth analysis of GaN-based micro-LED deduced by an equivalent circuit model

Bandwidth Analysis of High-Speed InGaN Micro-LEDs by an Equivalent Circuit Model

Theoretical considerations on efficiency degradation due to thermal effect in a planar GaN-based LED with a GaN substrate

A Compact Gate-Width Scalable Model for Dual-Gate GaAs Phemt

Large-signal Modulation Characteristics of a GaN-based Micro-Led for Gbps Visible-Light Communication

Research on the Equivalent Analysis Model of a GaN LED Used as Receiver

Investigation of Modulation Bandwidth of InGaN Green Micro-LEDs by Varying Quantum Barrier Thickness

Large Modulation Bandwidth GaN-based Micro-Led Arrays on Si Substrates with Graded in Composition Barriers

Analytical Models of Electron Leakage Currents in Gallium Nitride-Based Laser Diodes and Light-Emitting Diodes

Modulation bandwidth improvement of GaN-based green micro-LEDs array by polarization-induced p-type doping

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

Improving Modulation Bandwidth of C-Plane GaN-based Light-Emitting Diodes by an Ultra-Thin Quantum Wells Design.

Electrothermal Modeling of Monolithically Integrated GaN-Based μLED Devices

Study of Equivalent Circuit of GaN Based Laser Chip and Packaged Laser

Modulation Characteristics of GaN-Based Light-Emitting-Diodes for Visible Light Communication

Improving the Modulation Bandwidth of GaN‐Based Light‐Emitting Diodes for High‐Speed Visible Light Communication: Countermeasures and Challenges

Improvement in Modulation Bandwidth of Micro-LED Arrays Based on Low-Temperature-Interlayer Approach

Influence of AlGaN Electron Blocking Layer on Modulation Bandwidth of GaN-Based Light Emitting Diodes

Fabrication and Characterization of GaN-Based Micro-LEDs on Silicon Substrate*

GaN-Based Freestanding Micro-LEDs with GHz Bandwidth and Low Efficiency Droop for Visible Light Communication

P‐11.10: Design and performance simulation study of optoelectronic co‐modulated Full GaN LET