Abstract:The conversion of solid waste into secondary resources has become a prerequisite for the sustainable development of the industry. This study focused on the development of the detoxification process for spent carbon cathode (SCC) without environmental pollution risks and the exploration of the recycling direction of recovered carbonaceous materials. First, the mechanism of thermodynamic conversion and decomposition of toxic substances was explored. Parameters of NaOH–Na2CO3 binary molten salt roasting were optimized through an orthogonal design and a single-factor experiment, and gas release behavior during detoxification treatment was investigated. Results showed that most of the fluoride and cyanide were dissociated and decomposed, and the leaching concentration of fluoride and cyanide was as low as 7.58 and 0.12 mg/L after detoxification treatment, respectively. Then, a multistage recovery process of fluorine from fluorine-containing leachate was designed, and the comprehensive utilization of exhaust gas and the recycling of the reaction reagent were realized simultaneously. The possibility of recovering graphitized carbon blending to prepare carbon anodes was discussed in detail, and the catalytic mechanism of main impurity elements on the O2/CO2 reactivity of carbon anodes was investigated via density-functional-based tight binding (DFTB). The results showed that the Boudouard reaction and carbon–O2 reaction were affected because of the presence of Ca or Na, and the recovered graphitized carbon with a low blending ratio was more suitable for the preparation of carbon anodes. Finally, an economic benefit analysis was conducted to evaluate the industrial application potential of the proposed detoxification treatment. Compared with landfills, the proposed process reduced the disposal cost while eliminating environmental pollution risks and realized the on-site recovery and reuse of valuable components, showing considerable environmental and economic benefits.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.0c06067?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.0c06067</a>.Formula for preparing carbon anode; scheme of the single-factor experiment; economic benefit analysis; and particle size distribution of the mixture with different NaOH-to-Na2CO3 mass ratios (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.0c06067/suppl_file/sc0c06067_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Molten-salt enhanced anodic oxidation for upcycling alloy scraps

Recycling alloy scrap and CO2 by paired molten salt electrolysis

A combined oxidation and salt-thermal approach to converting copper scraps to copper oxides as energy storage materials

A Universal Molten Salt Method for Direct Upcycling of Spent Ni‐rich Cathode Towards Single‐crystalline Li‐rich Cathode

Recovery of aluminum from waste aluminum alloy by low-temperature molten salt electrolysis

A solid-state electrolysis process for upcycling aluminium scrap

A Novel Process for Simultaneous Extraction of Iron, Vanadium, Manganese, Chromium, and Titanium from Vanadium Slag by Molten Salt Electrolysis

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

Upgrading recycling of Al–7 wt%Si alloys using electromagnetic force in directional solidification

Electrochemical behavior of deoxidation titanium scrap process by induced overpotential molten salt electrolyte

Molten Salt-Enhanced Production of Hydrogen by Using Skimmed Hot Dross from Aluminum Remelting at High Temperature

Study on the Superhydrophilic Modification and Enhanced Corrosion Resistance Method of Aluminum Alloy Distillation Desalination Tubes

Sustainable recycling of titanium scraps and purity titanium production via molten salt electrolysis

Detoxification and Recovery of Spent Carbon Cathodes via NaOH–Na 2 CO 3 Binary Molten Salt Roasting–Water Leaching: Toward a Circular Economy for Hazardous Solid Waste from Aluminum Electrolysis

Integrated High‐Throughput and Machine Learning Methods to Accelerate Discovery of Molten Salt Corrosion‐Resistant Alloys

Accelerated Discovery of Molten Salt Corrosion-resistant Alloy by High-throughput Experimental and Modeling Methods Coupled to Data Analytics

An electrochemical approach to converting alloy scraps to (FeCrNiMnX) 3 O 4 high-entropy oxides for lithium-ion batteries

EIS study of oxidation heat‐treatment effects on corrosion behavior of Ni10Cu11Fe6Al metallic inert anode inside molten calcium chloride salt

Leaching mechanism of strategic metals from superalloy scrap under ultrasonic cavitation