Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Engineering a polyaniline nanoneedles-coated multi-layered Co 3 O 4 /NiO microsphere as high-performance Li-ion battery anode

A Reduced Graphene Oxide/sno2/polyaniline Nanocomposite for the Anode Material of Li-ion Batteries

Smart construction of polyaniline shell on Fe2O3 as enabling high performance anode toward flexible lithium-ion battery

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Enhanced Electrochemical Properties of Polyaniline-Coated LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium-Ion Batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Embedding Co2P Nanoparticles in N-Doped Carbon Nanotubes Grown on Porous Carbon Polyhedra for High-Performance Lithium-Ion Batteries

Bi‐Directional H‐Bonding Modulated Soft/Hard Polyethylene Glycol‐Polyaniline Coated Si‐Anode for High‐Performance Li‐Ion Batteries

A rod-on-tube CoMoO4@hydrogel composite as lithium-ion battery anode with high capacity and stable rate-performance

In Situ Fabrication of Nano Porous NiO-Capped Ni3P Film As Anode for Li-Ion Battery with Different Lithiation Path and Significantly Enhanced Electrochemical Performance

Nitrogen and Oxygen Codoped Carbon Anode Fabricated Facilely from Polyaniline Coated Cellulose Nanocrystals for High-Performance Li-Ion Batteries

Enhanced high-rate and cyclic performance of Co-free and Ni-rich LiNi0.95Mn0.05O2 cathodes by coating electronic/Li+ conductive PANI-PEG layer

Polyaniline coated Fe3O4 hollow nanospheres as anode materials for lithium ion batteries

Porous Co3V2O8 Nanosheets with Ultrahigh Performance As Anode Materials for Lithium Ion Batteries

SnO2@PANI Core-Shell Nanorod Arrays on 3D Graphite Foam: A High-Performance Integrated Electrode for Lithium-Ion Batteries.

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Lithiated Hybrid Polymer/Inorganic PAA/MnO 2 Protection Layer for High-Performance Tin Oxide Alloy Anode

Co3o4/Porous Carbon Nanofibers Composite As Anode for High-Performance Lithium Ion Batteries with Improved Cycle Performance and Lithium Storage Capacity

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

Hollow Ni/NiO@N-doped Porous Carbon for Lithium Ion Battery Anode Based on Dual-Buffering Strategy

Coaxial Co3O4@polypyrrole Core-Shell Nanowire Arrays for High Performance Lithium Ion Batteries