Abstract:In 2000, Tarascon et al. revealed the reversible conversion reaction based on the size effect of nanoparticles in metal oxide system, whose theoretical capacity is up to 1000mAh·g-1[1]. However, except large capacity, metal oxide as anode material has its own drawbacks. For example, the electronic conductivity of metal oxides is usually poor, and some of them will form alloy with lithium during the reaction process which cause huge volume change. In order to overcome these obstacles, lots of methods have been presented. Mainly includes the following ways: 1) Fabricating thin film materials, 2) Synthesizing nanostructured materials, 3) Doping or preparing composite materials. Further works showed the doping is effective and convenient in thin film fabrication, and the composite thin films usually obtained better performance than the single system. NiO-NiSe nanocomposite films were fabricated by plused laser deposition. Charge/discharge measurements, cyclic voltammograms and AC impedance tests were used to investigate cyclic performance and electrochemical properties of the materials. X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) were employed to detect the structure, morphology and composition of these nanocomposite films in certain electrochemical states. In addition, the electrochemical reaction mechanism of the films versus Li were discussed. The results indicated that: Compared with the single system NiO or NiSe, the transfer resistance of lithium ion in NiO-NiSe nanocomposite thin film is smaller. NiO-NiSe electrode also exhibited a little higher discharge-charge capacity and better cycle performance. After 50 cycles, a reversible capacity of 495mAh.g-1 can still be obtained. NiO-NiSe nanocomposite film also has good rate capability and is more suitable for lithium-ion battery anode material. The electrochemical reaction mechanism investigation showed that NiO and NiSe in the electrode reacted with lithium separately and could be reversibly reproduced.

In Situ Fabrication of Nano Porous NiO-Capped Ni3P Film As Anode for Li-Ion Battery with Different Lithiation Path and Significantly Enhanced Electrochemical Performance

NiO/Ni Powders with Effective Architectures As Anode Materials in Li-ion Batteries

Facile Synthesis of Mesoporous NiCo2O4 Nanoneedle Arrays on Three Dimensional Graphene Thin Film Grown on Ni Foam for a High-Performance Binder-Free Lithium-Ion Battery Anode

Fabrication of Highly Ordered Porous Nickel Phosphide Films and Their Application As Anode for Lithium Ion Batteries

Enhanced Rate Capability of Multi-Layered Ordered Porous Nickel Phosphide Film As Anode for Lithium Ion Batteries

Three-Dimensional Porous Nano-Ni/Fe3o4 Composite Film: Enhanced Electrochemical Performance For Lithium-Ion Batteries

Facile Synthesis of Nickel Phosphide @ N-Doped Carbon Nanorods with Exceptional Cycling Stability as Li-Ion and Na-Ion Battery Anode Material

Self-standing three-dimensional porous NiO/Ni anode materials for high-areal capacity lithium storage

In Situ Fabrication of Ni2P Nanoparticles Embedded in Nitrogen and Phosphorus Codoped Carbon Nanofibers as a Superior Anode for Li-Ion Batteries

Insert Zn Nanoparticles into the 3D Porous Carbon Ultrathin Films as a Superior Anode Material for Lithium Ion Battery

Free-standing films of nickel nanowires anchored with Ni3S2 nanosheets for stable Li anodes

Nickel Foam-Supported Porous NiO/polyaniline Film As Anode for Lithium Ion Batteries

High-pseudocapacitance of porous and square NiO@NC nanosheets for high-performance lithium-ion batteries

Electrochemical performances of NiO/Ni2N nanocomposite thin film as anode material for lithium ion batteries

Composite NiO-NiSe Thin Film Fabricated by Pulse Laser Deposition As a New Anode of Lithium Ion Batteries

Porous Nio/Poly(3,4-Ethylenedioxythiophene) Films As Anode Materials for Lithium Ion Batteries

In situ fabrication of a graphene-coated three-dimensional nickel oxide anode for high-capacity lithium-ion batteries

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

Lithiated NiCo2O4 Nanorods Anchored on 3D Nickel Foam Enable Homogeneous Li Plating/Stripping for High-Power Dendrite-Free Lithium Metal Anode

Controllable Synthesis of a Monophase Nickel Phosphide/Carbon (ni5p4/c) Composite Electrode Via Wet‐Chemistry and a Solid‐State Reaction for the Anode in Lithium Secondary Batteries

Nanostructured NiSi thin films as a new anode material for lithium ion batteries