Abstract:A peculiar nanostructure consisting of nitrogen-doped, carbon-encapsulated (N-C) SnO2@Sn nanoparticles grafted on three-dimensional (3D) graphene-like networks (designated as N-C@SnO2@Sn/3D-GNs) has been fabricated via a low-cost and scalable method, namely an in situ hydrolysis of Sn salts and immobilization of SnO2 nanoparticles on the surface of 3D-GNs, followed by an in situ polymerization of dopamine on the surface of the SnO2/3D-GNs, and finally a carbonization. In the composites, three-layer core-shell N-C@SnO2@Sn nanoparticles were uniformly grafted onto the surfaces of 3D-GNs, which promotes highly efficient insertion/extraction of Li(+). In addition, the outermost N-C layer with graphene-like structure of the N-C@SnO2@Sn nanoparticles can effectively buffer the large volume changes, enhance electronic conductivity, and prevent SnO2/Sn aggregation and pulverization during discharge/charge. The middle SnO2 layer can be changed into active Sn and nano-Li2O during discharge, as described by SnO2 + Li(+) → Sn + Li2O, whereas the thus-formed nano-Li2O can provide a facile environment for the alloying process and facilitate good cycling behavior, so as to further improve the cycling performance of the composite. The inner Sn layer with large theoretical capacity can guarantee high lithium storage in the composite. The 3D-GNs, with high electrical conductivity (1.50 × 10(3) S m(-1)), large surface area (1143 m(2) g(-1)), and high mechanical flexibility, tightly pin the core-shell structure of the N-C@SnO2@Sn nanoparticles and thus lead to remarkably enhanced electrical conductivity and structural integrity of the overall electrode. Consequently, this novel hybrid anode exhibits highly stable capacity of up to 901 mAh g(-1), with ∼89.3% capacity retention after 200 cycles at 0.1 A g(-1) and superior high rate performance, as well as a long lifetime of 500 cycles with 84.0% retention at 1.0 A g(-1). Importantly, this unique hybrid design is expected to be extended to other alloy-type anode materials such as silicon, germanium, etc.

Lithiated Hybrid Polymer/Inorganic PAA/MnO 2 Protection Layer for High-Performance Tin Oxide Alloy Anode

Lithiated Hybrid Polymer/Inorganic PAA/MnO2 Protection Layer for High-Performance Tin Oxide Alloy Anode

A high-performance tin phosphide/carbon composite anode for lithium-ion batteries

PPy‐encapsulated SnS2 Nanosheets Stabilized by Defects on a TiO2 Support As a Durable Anode Material for Lithium‐Ion Batteries

Understanding the Role of Conductive Polymer in Thermal Lithiation and Battery Performance of Li-Sn Alloy Anode

Dual Immobilization of SnOx Nanoparticles by N-Doped Carbon and TiO2 for High-Performance Lithium-Ion Battery Anodes.

In-situ Formation of Hybrid Li3PO4-AlPO4-Al(PO3)3 Coating Layer on LiNi0.8Co0.1Mn0.1O2 Cathode with Enhanced Electrochemical Properties for Lithium-Ion Battery

A hybrid polymer protective layer with uniform Li+ flux and self-adaption enabling dendrite-free Li metal anodes

Dual carbon layer hybridized mesoporous tin hollow spheres for fast-rechargeable and highly-stable lithium-ion battery anodes

Thermal Lithiated-TiO2: A Robust and Electron-Conducting Protection Layer for Li-Si Alloy Anode

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Amorphous SnO2 nanoparticles embedded into a three-dimensional porous carbon matrix as high-performance anodes for lithium-ion batteries

A Catalyst SnO2 Improves the Performance of All-Solid-State Batteries with LiNi0.5Mn1.5o4@SnO2 Cathodes, Pmma-Pvdf@ Li1.3ai0.3ti1.7(Po4)3 Composite Solid Electrolyte and Lithium Metal Anodes

A Polymeric Composite Protective Layer for Stable Li Metal Anodes

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Carbon-Coated Tin-Titanate derived SnO2/TiO2 nanowires as High-Performance anode for Lithium-Ion batteries

Multi-effect anthraquinone-based polyimide enclosed SnO2/reduced graphene oxide composite as high-performance anode for lithium-ion battery

Nitrogen-Doped Carbon-Encapsulated SnO2@Sn Nanoparticles Uniformly Grafted on Three-Dimensional Graphene-like Networks as Anode for High-Performance Lithium-Ion Batteries

High Performance TiP 2 O 7 Nanoporous Microsphere As Anode Material for Aqueous Lithium-Ion Batteries

Carbon-coated SnO x anchored on phosphorus-doped carbon framework as high performance anode of lithium-ion batteries

High Performance Li[Li0.2Ni0.13Co0.13Mn0.54](BO4)0.75x(BO3)0.25xO2-3.75x Cathode with Polyanion for Li-Ion Batteries