Abstract:Optical and laser crystals grown by Czochralski technique from a solute-rich melt usually suffer defects of melt inclusion or bubble core, which severely affects optical, thermal and mechanical properties of the material. The main purpose of this paper is to study the inclusion mechanisms and to minimize such defects. Two types of mechanisms possibly responsible for inclusion defects are presented. In the current investigation, Czochralski grown optical single crystals are examined to recognize the effects of crystal rotation and natural convection on the melt flow pattern and solidification interface shape. It is established that increasing the rotation rate of crystal or reducing natural convection in the melt will cause the solid-liquid interface change from the convex shape to concave and high concentration of the species may be pushed away from the solidification interface. Simulations were performed to establish the relationships between Gr/Re-2 and growth interface shape change, and between Gr/Re-2 and stagnant point location were established. A disk submerged into the melt was used to reduce natural convection by reducing the melt height. The idea was similar to the submerged baffle or submerged heater used in Bridgeman crystal growth. The effect of submerged baffle on enhancement of crystal rotation effect was demonstrated. Simulation results showed that the melt flow near the solidification interface depended strongly on the baffle location, which was not surprised. The idea of submerged heater was also examined in Czochralski growth. Different from a constant temperature close to the melting temperature used in Bridgman growth, the submerged heater temperature should be selected on a higher temperature between the melting temperature and crucible temperature. The value depended strongly on the ratio between crystal and crucible diameters. It was proved that a constant temperature was not the best choice in Czochralski growth. In fact, an optimized temperature profile could be found in numerical simulations for melt flow control and inclusion suppression.

Formulation of voids and bubbles as biased sinks to crystalline point defects

Modelling the effects of void swelling and spatial heterogeneity on the fracture of metallic materials by crystal plasticity

Microscopic Mechanism of Void Nucleation at Dislocation Boundaries: A Discrete Dislocation Dynamics Simulation Study

Atomic modeling assessment of the interaction distance and effective bias for small defect clusters absorption at a void in BCC Fe

Identification of self-interstitial atoms and vacancies in crystalline materials in atomistic simulation

Modeling the Interaction Between Vacancies and Grain Boundaries During Ductile Fracture

A Rate Dependent Formulation for Void Growth in Single Crystal Materials

An unified model for dislocations interacting with complex-shape voids in irradiated metals

Production Bias: a Proposed Modification of the Driving Force for Void Swelling under Cascade Damage Conditions

Crystal Plasticity Based Investigation of Micro-Void Evolution under Multi-Axial Loading Conditions

Impact of Thermal Stress on Intrinsic Point Defect in Czochralski Crystal Growth: Developing a Quantitative Model for Defect Formation and Distribution

Points defects produced by irradiation: influence of boundary conditions on their biased elimination

Modification on Theory of Sink Strength: an Object Kinetic Monte Carlo Study

Modeling irradiation-induced intragranular gas bubble in tungsten under external tensile loading

Shock Response and Evolution Mechanism of Brittle Material Containing Micro-Voids

Void Nucleation at Dislocation Boundaries Aided by the Synergy of Multiple Dislocation Pile-Ups

VOID GROWTH BEHAVIOR SIMULATION BASED ON CRYSTAL PLASTICITY

Atomic Simulation of Void Effect on the Microstructure Evolution and Internal Stress Transmission in Nanoindentation

Structure, Energetics and Kinetics of Metallic Grain Boundary Nano-Voids and Corresponding Discrete Model Studied by Multiscale and Differential Evolution Simulations

A Novel Method For Melt Flow Control And Inclusion Suppression In Optical Crystal Growth

Numerical modeling of equiaxed crystal growth in solidification of binary alloys using a lattice Boltzmann-finite volume scheme