Abstract:The presence of defects produced by additive manufactured (AM) processes in structural Ti alloys such as Ti-6Al-4V is known to have serious implications on the deformation and fatigue behaviour of engineering components. However, there is little understanding about the localised plastic deformation patterns that develop around AM defects, and the associated local conditions that could lead to the nucleation of micro-cracks under creep loading conditions. In this work, the effects of the morphology and volume fraction of AM defects and temperature on the strain localisation behaviour around such defects in Ti-6Al-4V will be addressed. To that purpose, a novel rate-dependent crystal plasticity formulation is proposed to describe the mechanical behaviour of the alloy's predominant a '(HCP)-phase. ' (HCP)-phase. Representative volume elements (RVEs) of the AM produced microstructures are digitally reconstructed from EBSD orientation maps obtained on planes perpendicular and transversal to the microstructure's AM growth direction. Calibration of the single crystal model for the a '-phase '-phase is carried out from macroscopic uniaxial tensile data from polycrystalline AM specimens at different strain rates and temperatures and published creep data. Furthermore, RVEs containing AM defects of different morphologies and volume fractions are relied upon to investigate the strain localisation behaviour around the defects under uniaxial loading at ambient and high temperatures. It is found that the extent of the localised accumulated plastic strain around defects depends greatly on whether the voids surface are smooth or have sharp corners, with the latter being associated with more severe localisation patterns. Moreover, a numerical investigation into the crack initiation behaviour of AM Ti-6Al4V under uniaxial creep loading at 450 degrees C revealed that the development of the local conditions suitable for the nucleation of creep damage/micro-cracks is accelerated in the presence of typical AM defects, and the extent of that acceleration depends strongly on their morphology. An AM defect shape parameter is introduced to quantify the way their morphology affects the time for creep crack initiation/damage.

A Rate Dependent Formulation for Void Growth in Single Crystal Materials

Cylindrical Void in a Rigid-Ideally Plastic Single Crystal. Part I: Anisotropic Slip Line Theory Solution for Face-Centered Cubic Crystals

High-strain-rate Void Growth in High Entropy Alloys: Suppressed Dislocation Emission = Suppressed Void Growth

A coupled kinetic-constitutive approach to the study of high temperature crack initiation in single crystal nickel-base superalloys

The mechanistic origins of heterogeneous void growth during ductile failure

A Multiscale Micromechanics Approach to Describe Environmental Effects on Surface Crack Initiation under Cyclic Loading

Crystal Plasticity-Based Micromechanical Finite Element Modelling of Ductile Void Growth for an Aluminium Alloy under Multiaxial Loading Conditions

Gradient-Dependent Deformation of Two-Phase Single Crystals

Crystal Plasticity Based Investigation of Micro-Void Evolution under Multi-Axial Loading Conditions

A Multiscale Approach for Coupled Phenomena in Fcc Materials at High Temperatures

Void Growth in BCC Metals Simulated with Molecular Dynamics using the Finnis-Sinclair Potential

4731 - PREDICTION OF CRACK INITIATION IN SINGLE CRYSTAL Ni-BASE SUPERALLOYS AT HIGH TEMPERATURES

Effects of loading rate on void growth in amorphous glassy polymers

A Reduced Micromorphic Single Crystal Plasticity Model at Finite Deformations. Application to Strain Localization and Void Growth in Ductile Metals

Crystal Plasticity Based Investigation of the Effects of Additive Manufactured Voids on the Strain Localization Behaviour of Ti-6al-4v

Modeling plasticity-mediated void growth at the single crystal scale: A physics-informed machine learning approach

Finite Element Implementation of A Generalised Non-Local Rate-Dependent Crystallographic Formulation for Finite Strains

The effect of void defect on the evolution mechanisms of dislocations and mechanical properties in nickel-based superalloys by molecular dynamics simulation of real γ/γ′ structures

A Crystal Plasticity Based Constitutive Model for the Temperature Dependent Anomalous Behaviors of Nickel-Based Single-Crystal Superalloy

Casting voids in nickel superalloy and the mechanical behaviour under room temperature tensile deformation

Study on the Growth Behavior of Voids Located at the Grain Boundary