Abstract:A novel pathway for the magnesiothermic reduction of boron oxide and magnesium dodecaboride (MgB12) in the presence of carbon by a self-propagating high-temperature synthesis method was proposed that was aimed at the direct preparation of boron carbide nanopowder. The combined utilization of two boron sources, boron oxide and MgB12, allowed tailoring the overall caloric effect of the process, increasing the yield of the target product and lessening the laborious leaching process. In addition, it is an alternative way to utilize magnesium borides, which are inevitable side products at boron production. Multivariate thermodynamic calculations performed in the B2O3-MgB12-Mg-C system allowed estimating equilibrium compositions of the products and deducing the optimum composition of the initial mixture for obtaining B4C. For the latter, the adiabatic temperature (Tad) is 2100 °C, which is theoretically enough for the implementation of the self-propagating reaction. The combustion reaction was shown to be extremely sensitive to the initial mixture composition, external pressure, as well as sample diameter (heat losses). It proceeds in self-oscillatory mode and leads to the product of a layered macrostructure. The combustion product was then consolidated by the spark plasma sintering technique at different conditions. Vickers microhardness was measured, and the wear erosion behavior was examined. The variation in lattice parameters of boron carbide reflected the influence of synthesis, sintering and erosion conditions on the ordering/disordering of the boron carbide structure.

The Role of Carbon Precursor on Boron Carbide Synthesis by Laser-CVD

Laser-Assisted Deposition of r-B4C Coatings Using Ethylene as Carbon Precursor

Influence of Carbon Content on the Crystallographic Structure of Boron Carbide Films

Preparation of Thin Films of Carbon-Based Compounds

Novel Pathway for the Combustion Synthesis and Consolidation of Boron Carbide

Enhancement of the properties of pulsed laser-deposited carbon nitride by the synchronisation of laser and N2 gas jet pulses

Influence of the gas composition on the synthesis of boron-doped carbon nanotubes by ECR-CVD

Chemical Structure and Micro-Mechanical Properties of Ultra-Thin Films of Boron Carbide Prepared by Pulsed-Laser Deposition

Magnetron sputter deposition of boron carbide in Ne and Ar plasmas

Synthesis of boron carbide films by ion beam sputtering

Growth of Diamond-Like Carbon and Icosahedral Boron Carbide by Chemical Vapor Deposition System

A First-Principles Investigation into the Adsorption Behavior and Deposition Mechanism of Boron-Containing Gases on Si(100) Surfaces During Chemical Vapor Deposition

Effect of Precursor Purity and Flow Rate on the CVD Growth of Hexagonal Boron Nitride

Electron Cyclotron Resonance Plasma-Assisted Pulsed Laser Deposition of Boron Carbon Nitride Films

Conformal Chemical Vapor Deposition of B4C Thin Films onto Carbon Nanotubes

Composition and Structure of BCN Films Prepared by Ion Beam-Assisted Pulsed Laser Deposition

The Hydrothermal Method of Preparing Boron–Saccharide Precursors for the Synthesis of Boron Carbide and Its Influence on the Morphology and Phase Composition of the Obtained Products

Optical and electrical properties of synthesized reactive rf sputter deposited boron-rich and boron-doped diamond-like carbon thin films

Synthesis of BCN thin films by nitrogen ion beam assisted pulsed laser deposition from a B4C target

Plasma CVD of hydrogenated boron-carbon thin films from triethylboron

On the origin of epitaxial rhombohedral-B4C growth by CVD on 4H-SiC