Abstract:Accurate prediction and measurement of yield stress are crucial for optimizing sludge treatment and disposal. However, the differences and applicability of various methods for measuring yield stress are subjects of ongoing debate. Meanwhile, literature on measuring sludge yield stress is limited to low solid concentrations (TS <10%), understanding and studying the yield stress of medium to high solid concentration sludge is crucial due to increasingly stringent standards for sludge treatment and disposal. So, this study employed a rotational rheometer to measure sludge yield stress across a wide range of TS (4-50%) using steady shear, dynamic oscillatory shear, and transient shear. The study derived significant conclusions by comparing and summarizing the applicability and limitations of each testing method: Dynamic oscillatory shear methods, including G'-σ curve method, γ-σ curve method, and G**γ<sub>c</sub> method can measure sludge yield stress ranging from 4% to 40% TS, while other methods are restricted to low or limited solid concentrations; The G' = G″ method, utilizing the intersection of G' and G″ curves, consistently yields the highest value for yield stress when 4%≤ TS ≤ 12%; The rotational rheometer cannot measure sludge yield stress when the solid concentration exceeds 40% TS; The relationship between sludge yield stress and solid concentration is stronger as a power-law for TS ≤ 25%, transitioning to linear for higher concentrations (28%≤ TS <40%). This study systematically explores the applicability and limitations of various measurement methods for characterizing sludge yield stress across a wide range of solid concentrations, providing valuable guidance for scientific measurement and highlighting challenging research issues.

Application of lubrication theory to determine yield stress in slump tests

Thermodynamics-based bounding surface model for overconsolidated clay

Analysis of the slump test for on-site yield stress measurement of thickened tailings

Physical Derivation of Effective Stress from Balance Law and Experimental Evidence

Generalized models of slump and spread in combination for higher precision in yield stress determination

Analysis of conical slump shape reconstructed from stereovision images for yield stress prediction

Yield stress Measurement of municipal sludge: A comprehensive evaluation of testing methods and concentration effects using a rotational rheometer

Compression and Consolidation Behaviors of Lime-Treated Dredging Slurry under Vacuum Pressure

Yield stress prediction from 3D reconstruction of fresh concrete slump

Rheology and Yield Stress Evolution of Highly Flowable Cementitious Grouting Materials: Mechanisms and Modeling

A Method for Determining Yield Stress of Unsaturated Soils from Lateral Pressure

Stress Dilatancy of Natural Soft Clay under an Undrained Creep Condition

A New Parameter to Evaluate Liquefaction Resistance of Saturated Sand under Complex Dynamic Stress Paths

Cyclic shearing behavior of K0-consolidated day and its rheological simulation

Analysis on Effective Stress Formula and Consolidation of Gassy Muddy Clay

Novel testing method for thixotropy of paste slurry with respect to influencing factors and rheological parameters

Study on the Strength and Yield Behaviors of Modified Silty Clay

Comparative Study of Different Measurement Methods for Characterizing Rheological Properties of Lubrication Layer

A microstructural criterion for yielding: linking thixotropy and the yield stress

Theoretical Study on the Lubrication Failure for the Lubricants with a Limiting Shear Stress

Calculation of Friction Force for Slurry Pipe Jacking considering Soil-Slurry-Pipe Interaction