Abstract:Abstract Based on the climatic and geological characteristics of the non-weight collapsible loess area, the paper analyses the cooperative working conditions of the concrete surface structure and the non-weight collapsible loess subgrade. The thesis uses coal gangue powder, fly ash, calcium carbide slag powder, and silica fume to modify the permeable concrete, and studies the unconfined compression test after the modification, the load ratio (cbr) test, and the eds-sem scanning electron microscope test. And other physical and mechanical properties. The experimental results prove that the modified soil with 30% calcium carbide slag powder after 28 days of curing has the best compressive performance, but has a heavier industrial peculiar smell; 30% silica fume and 30% silica fume are mixed the compressive performance of the modified soil with coal gangue powder is close; the compressive performance of the modified soil with 30% fly ash is relatively low. Among the four different admixtures in the test, the improved soil mixed with 30% calcium carbide slag powder and 30% concrete gravel has the best compressive effect, and the other three improved soils have similar effects. In the experiment, after four different admixtures were used to improve soil mixing and concrete crushed gravel, the bearing ratio of the modified soil obtained by mixing 30% calcium carbide slag powder and 30% concrete crushed gravel was the best and much higher than that of the other three materials. Scanning through the electron microscope, it was observed that the admixture had a greater effect on the adhesion of the soil foundation and the concrete gravel, which made the soil structure more stable.

Study on the Strength and Yield Behaviors of Modified Silty Clay

Non-monotonic compression test study on Xiaoshan saturated soft soils

Experimental Study on Shear Strength Considering Initial Void Ratio and Plasticity Index

Macro- and Meso-Scale Parametric Analysis of Egg-shaped Yield Surface of Structural Soil

Cyclic Failure Characteristics of Silty Sands with the Presence of Initial Shear Stress

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Strength and Deformation Characteristics of Compacted Silt from the Lower Reaches of the Yellow River of China under Monotonic and Repeated Loading

COUPLING EFFECTS OF INITIAL SHEAR STRESS AND LOADING RATE ON STRENGTH BEHAVIORS OF SATURATED SOFT CLAY

VARIATION OF THE SHEAR STRENGTH OF XIAMEN UNSATURATED RESIDUAL SOILS WITH WATER CONTENT

Experimental and Numerical Investigation on the Tensile Fracture of Compacted Clay

STUDY ON STRAIN SOFTENING IN SATURATED SOFT CLAY UNDER CYCLIC LOADING

Experimental Study of Compression and Shear Deformation Characteristics of Remolded Shanghai Soft Clay

Study of shear properties and shear model of soil-rock mixture

Study on microscopic pores and physico-mechanical properties of red clay modified by calcium carbonate

Analysis of compressibility and mechanical behavior of red clay considering structural strength

Study of Strain Accumulation Strengthened Model for Clay under Cyclic Loadings

Experimental Study of Silty Clay Plane Strain Tri-axial Test under RTC Path and Modified Cam-clay Model

Experimental Study on the Performance of Improved Collapsible Loess Mixture with Concrete Crushed Gravel

Mechanical Behavior of Remolded Overconsolidated Shanghai Soft Clay and Its Elastoplastic Simulation

Experimental and discrete element modeling study on suction stress characteristic curve and soil–water characteristic curve of unsaturated reticulated red clay

Experimental Study on the Deformation and Strength of Silt Soil under Cyclic Loading