Abstract:Al2O3–Cr2O3 refractories have excellent slag corrosion resistance and can adapt to the oxidation/reduction atmosphere in the smelting reduction ironmaking furnace. Improving the corrosion resistance of chrome corundum refractories is of great significance for extending the life length of industrial kilns and decreasing carbon emissions. In this work, the influences of ZrO2 content on the phase evolution, microstructure, physicochemical properties, mechanical properties and slag corrosion resistance of the ZrO2 reinforced Al2O3–Cr2O3 composite refractories were investigated. The results show that the ZrO2 reinforced Al2O3–Cr2O3 composites are primarily composed of (Al, Cr)2O3 solid solution and m-ZrO2. The compressive strength, flexural strength and hardness of the composite refractories can be improved by adding 2.5 wt% ZrO2. However, adding more ZrO2 will reduce its mechanical properties. This is due to ZrO2 excessive content will augement the porosity of the composite refractories, and the phase transformation of ZrO2 will also lead to the formation of microcracks during the cooling process. It is worth noting that higher ZrO2 content improves the thermal shock resistance of the composites, which is primarily put down to the microcrack toughening mechanism of ZrO2. The corrosion tests show that the thicknesses of the corrosion and infiltration layers of composite refractories are significantly decreased accompanied by ZrO2 content increase. This is because the formation of high melting point CaZr4O9 reduces the CaO content and slag alkalinity, and inhibits the dissolution of Al2O3 into the slag to a certain extent. Therefore, the slag corrosion/penetration resistance of the of the composites are obviously improved with the increase of ZrO2 addition.

Interactions of Cr2O3–Al2O3–ZrO2 refractory with slags in an entrained-flow coal-water slurry gasifier

Corrosion of high-chrome refractory materials by high-sodium slag in an entrained-flow gasifier

Interactions of high-chromia refractory materials with infiltrating coal slag in the oxidizing atmosphere of a cyclone furnace

Corrosion behavior of CaO–Al2O3–SiO2–MgO-Cr2O3 slag on MgO refractory brick for smelting of chromite

Modeling of Multiphase Reaction and Slag Flow in Single-Burner Coal Water Slurry Gasifier

Corrosion in high alumina refractory serviced in a bench-scale entrained flow gasifier

Microstructure evolution, mechanical characteristics and erosion behavior of Cr2O3–Al2O3–MgO–ZrO2 refractories in molten reduction slag

Coal ash slag wettability on Cr2O3-Al2O3 -ZrO2 bricks and its penetration behavior

Corrosion mechanism of cement-bonded Al2O3–MgAl2O4 pre-cast castables in contact with molten steel and slag

Corrosion of MgO–C Refractory with Ladle Slags

Microstructure, phase evolution, mechanical properties and slag corrosion resistance of ZrO2 reinforced Al2O3–Cr2O3 composites

Slag properties of blending coal in an industrial OMB coal water slurry entrained-flow gasifier

Corrosion mechanism of reactive MgO‐bonded Cr2O3‐bearing castables in CaO–Al2O3–Fe2O3–SiO2‐based steel‐making slag

Application and Corrosion Characteristics of Chrome-Free SiC-MgAl2O4 Refractory Linings Serviced in an Entrained Flow Gasifier

Refractory Failure in Entrained-Flow Gasifier: Investigation of Partitioned Erosion Characteristics in an Industrial Opposed Multi-Burner Gasifier

Corrosion mechanism of Al2O3–SiC–C refractory by SiO2–MgO-based slag

Refractory Failure in Entrained-Flow Gasifier: Vision-based Macrostructure Investigation in a Bench-Scale OMB Gasifier

Corrosion mechanism of magnesia-chrome refractory bricks with FetO-SiO2-Cr2O3 copper converter slag

Study on slag composition and flow property in a bench-scale OMB gasifier

Dissolution of Al2O3–C bricks in 45 wt% CaO-45 wt% SiO2-x wt% CaF2-(10-x) wt% Na2O slag

Particulate matter properties in a bench-scale entrained-flow coal water slurry gasifier