Abstract:In recent publications, we have proposed a model of fatigue damage to steels under multicyclic loading of smooth specimens and dependencies to describe the kinetics of fatigue limit reduction as a damage parameter. Such a decrease is due to the initial fatigue damage of the material at the microstructure level, which leads to the incubation of a crack in the zones of microstructural stress concentrators or its weakest elements, followed by germination along crystallographic planes and then by the transition to growth along forced planes under the action of normal stresses. In the currently known studies, fracture mechanics methods adapted to the growth of short cracks describe fatigue damage at the initial stages of fatigue. Their practical application is complicated by the need to determine the specific characteristics of the microstructure of materials, which are only sometimes available and unambiguous. In this regard, we consider a phenomenological approach based on the assumption of continuous fatigue damage of a material from the beginning of its cyclic loading until fracture or until the initiation of a non-propagating crack at the endurance limit. This damage can be described by a drop in the initial endurance limit to its standardized value at the French line and then to the level determined by the size of the crack at the fracture of the specimen. As the crack grows from the French line to fracture, the endurance limit corresponds to the threshold stress in the terminology of fracture mechanics. To describe the change in the endurance limit, a dependence is proposed that uses the parameters of the fatigue curve. A similar relationship is used to describe crack growth, which causes a decrease in the endurance limit.

On the significance of transition behavior in fatigue crack growth

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

A Transition Size of Dividing Crack Initiation and Propagation Phases and the Fatigue Total Life Prediction Approach

A Novel Method for Characterizing the Fatigue Crack Propagation of Steel Via the Weak Magnetic Effect

A Concise Binomial Model for Nonlinear Creep-Fatigue Crack Growth Behavior at Elevated Temperatures

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

In-situ observation of strain evolution and ratchetting of growing fatigue cracks

Application of a Cohesive Zone Model for Simulating Fatigue Crack Growth from Moderate to High <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML" id="M1"><mml:mi mathvariant="normal">Δ</mml:mi><mml:mi>K</mml:mi></mml:math> Levels of Inconel 718

Fatigue Crack Growth Mechanism of Ni-based Weld Metal in a 9% Ni Steel Joint

The Influence of Prior Austenite Grain Size on Fatigue Crack Growth Threshold of Welds in Cr-Mo-V Steel Components

Physical description and model validation of welded joint fatigue damage evolution

A NOVEL PARAMETER FOR EVALUATING THE FATIGUE CRACK GROWTH RATE IN CARBON STEELS

The Effect of Microstructure on the Fatigue Crack Growth Behavior of Ni-Cr-Mo-V Steel Weld Metal

Investigation of Fatigue Mechanics and Crack Evolution Characteristics of Jointed Specimens Under Cyclic Uniaxial Compression

Mixed-mode I&II fatigue crack growth behaviors of 16MND5 steel: The role of crack driving forces and crack closure

Experimental Investigation and Numerical Simulation on Fatigue Crack Behavior of Bridge Steel Wnq570 Base Metal and Butt Weld

Comparison of the continuum damage and fracture mechanics in fatigue assessment of components containing residual stresses

Fatigue Crack Growth for Ferritic Steel under Negative Stress Ratio

Statistical Analysis Methods of Fatigue Crack Growth Rate

Computational Monitoring of an Initial Fatigue Crack Incubation and Growth in a Smooth Specimen

Experimental and numerical investigations of crack growth of hot-rolled steel Q420C using cohesive zone model