Abstract:The spectroscopic detection of ammonium (NH4+) has great significance. With the development of microfluidics, microfluidic spectroscopic analysis aiming at rapid, portable and multi-component detection has realized tremendous achievements. However, the excessive consumption of the indicating material which exists all the time has not been settled yet. Zinc porphyrin, being a natural chromophore, can reversibly detect NH4+ and settle the problem. But it suffers from the lack of selectivity. In allusion to these issues, a coupled microfluidic chip which consists of a reaction chip, a gas-diffusion chip and a detection chip is fabricated in our experiments. The reaction chip made of polydimethylsiloxane can convert NH4+ into NH3. The gas-diffusion chip which is made of two glass chips and a piece of polydimethylsiloxane gas-diffusion membrane allows NH3 diffuses into the detection solution. The detection chip immobilizes the indicating material tightly through the multi-layer structure. The indicating material fabricated by dying zinc porphyrin on the surface of the cation exchange resin permanently will turn from green to purple when it meets NH3 and will turn reversely into green when pure water is around. Using the coupled chip as the analytical platform, we set up a miniaturized spectroscopic detection system. With a portable spectrometer being the analytical instrument, we detect NH4+ by the transmission spectrum intensity change at the wavelength of 450 nm and study three factors that could affect the detection performance: the thickness of the gas-diffusion membrane, the flow rate and the dosage of the indicating material. First, we confirm the reversibility of the indicating process and settle the issue of indicating material consumption by the spectrum change intensity. The time responses show the rapidity of the indicating process. Then through the comparison to the contrast experiment, the high selectivity of the indicating process is demonstrated because the interference has no influence and the spectrum change is attributed merely to NH3. The relationship between the membrane thickness and the spectrum intensity change is obtained by changing the thickness of the gas-diffusion membrane in the gas-diffusion chip. Results show that the increase of the membrane thickness leads to a worse detection performance, but the outcome remains stable when the thickness is less than 10 mu m. So 10 mu m is selected as the optimal thickness in consideration of the mechanical strength. The impact of the flow rate is investigated afterwards. The results exhibit that the increase of the flow rate will decrease the spectrum intensity change, but the performance becomes unchanged when flow rate is less than 5 mu L . min(-1). Last, how the dosage of the indicating material impacts the results is studied. It is demonstrated that both excessive and inadequate indicating material will deteriorate the performance. So 5 mg is selected as the optimal amount. The spectroscopic detection system which uses the coupled chip as the analytical platform has the advantages of small volume, high economy, rapid response and realizes highly selective and reversible NH4+ detection.

Advancing 2D Imaging of Ammonium for Biological Application: Planar and Nanoparticle-Based Ion-Selective Optodes

The Fabrication of All Solid-State Ammonium Ion Selective Electrodes Used in Aquaculture

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Optical sensors for sodium, potassium and ammonium ions based on lipophilic fluorescein anionic dye and neutral carriers

Ion-Selective Optodes Based on Near Infrared Fluorescent Chromoionophores for Ph and Metal Ion Measurements

Fluorescent Ion Optodes Based on Calixarene Functionized Boron Dipyrromethene Chromoionophore for Simultaneous Measurement of Multi-Electrolytes in Biological Samples

A novel all-solid-state ammonium electrode with polyaniline and copolymer of aniline/2,5-dimethoxyaniline as transducers

An Electrochemical Enzyme Biosensor for Ammonium Detection in Aquaculture Using Screen-Printed Electrode Modified by Gold Nanoparticle/Polymethylene Blue

Innovations in ion-selective optodes: a comprehensive exploration of modern designs and nanomaterial integration

Comparative analysis of a bulk optode based on a valinomycin ionophore and a nano-optode in micelles with Pluronic F-127 for the quantification of potassium in aqueous solutions

Accurate and Rapid Determination of Ammonium in Water by Voltametric Analysis on a Novel Modified Electrode

Fluorescence Anisotropy as a Self-Referencing Readout for Ion-Selective Sensing and Imaging Using Homo-FRET between Chromoionophores

An indolium ion based colorimetric sensor for naked eye detection of cyanide and ammonia: Onsite detection technique for cyanide in natural sources and day to day monitoring of food spoilage

Development of Optical Nanosensors for Detection of Potassium Ions and Assessment of Their Biocompatibility with Corneal Epithelial Cells

Portable IC system enabled with dual LED-based absorbance detectors and 3D-printed post-column heated micro-reactor for the simultaneous determination of ammonium, nitrite and nitrate

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold II: Urea Based Tripodal Ionophores for Polymeric Membrane Nitrate Selective Electrodes

Efficient antibiotics, small organic molecules and inorganic anions detection with a fluorescent Ni(II) coordination polymer based multiple sensor system

Direct fluorescent measurement of blood potassium with polymeric optical sensors based on upconverting nanomaterials.

A method for estimating intracellular ion concentration using optical nanosensors and ratiometric imaging

Synthesis and experimental investigations of a photoactive naphthopyran for sensing nanomolar concentration of ammonia

The Reversible Ammonium Detection Based on the Coupled Microfluidic Chipand the Investigation of the Impact Factors