Abstract:Selective molecular ion probes are often insoluble in water and require a hydrophobic solvent environment for strong and selective binding, which runs counter to the desire of utilizing them in a homogeneous solution. This Account aims to guide the reader on how such molecules, often coined ionophores, can be harnessed to design exceptionally useful optical and electrochemical sensors. We start here with some historical context on the design of such ionophores and continue with the explanation of the response mechanism of optical and potentiometric sensors and the role of combined components to build a robust ion sensor. This Account is addressed to nonspecialist readers and for this reason avoids extensive use of equations or theoretical considerations. The interested reader should turn to the original literature for further reading. Emulsified optical sensors are introduced as an initial example. Here, multiple reagents are confined in an attoliter sensing nanodroplet of the organic phase, immiscible with the aqueous sample phase. In this case, the ionophore molecules may retain their high affinity and selectivity to the target ion and the aqueous sample phase does not have to be modified. Emulsified optical sensors allow one to achieve the selective chemical sensing of ions, even with optically silent ionophores. Such ionophore-based nanodroplets are also discussed as a useful novel class of complexometric titration reagents and optical end point indicators with unique selectivities. We then turn our attention to potentiometric sensing probes and briefly discuss the unique opportunity of a direct characterization of ion-ionophore complexation properties offered by membrane electrodes. A carbonate-selective membrane electrode containing a highly selective tweezer-type ionophore with trifluoroacetophenone functional groups is then used as an example for the construction of a robust all-solid-state sensor. This potentiometric probe, in combination with a pH electrode, can directly measure PCO2 in freshwater lakes, demonstrating a dramatically improved response time relative to traditional sensors equipped with a gas-permeable membrane. In recent years, new sensing modes and electrode designs have been introduced to expand the application scope of ionophore-based potentiometric sensors. Membrane electrodes containing ionophores are placed under dynamic electrochemistry control to give important progress in the field. We specifically highlight our recent works by membranes that are controlled by chronopotentiometry (controlled current) for speciation analysis, by ion transfer voltammetry on thin sensing films for multianalyte detection, by exhaustive coulometry for potentially calibration-free sensors and with coulometric membrane pumps for the selective delivery of reagents.

Optical sensors for sodium, potassium and ammonium ions based on lipophilic fluorescein anionic dye and neutral carriers

Conjugated polymers based fluorescent chemosensors for ions

Fluorescent Ion Optodes Based on Calixarene Functionized Boron Dipyrromethene Chromoionophore for Simultaneous Measurement of Multi-Electrolytes in Biological Samples

Facile, Low‐Cost and Flexible Ammonia Sensor Arrays Based on Metallic Ion Charge Carriers and Polymer Matrices

From Molecular and Emulsified Ion Sensors to Membrane Electrodes: Molecular and Mechanistic Sensor Design

Ion-Selective Optodes Based on Near Infrared Fluorescent Chromoionophores for Ph and Metal Ion Measurements

Determination of Complex Formation Constants of 18 Neutral Alkali and Alkaline Earth Metal Ionophores in Poly(vinyl Chloride) Sensing Membranes Plasticized with Bis(2-Ethylhexyl)sebacate and O-Nitrophenyloctylether

Microsphere Optical Ion Sensors Based on Doped Silica Gel Templates

Increasing the selectivity of optical anion sensors with cationic extracting agents

Ultrasensitive and Selective Detection of MnO4− in Aqueous Solution with Fluorescent Microgels

Dual Sensitivity─Potentiometric and Fluorimetric─Ion-Selective Membranes

Selective anion sensing in high salt water via a remote indicator displacement assay

Development of an Ion-Sensor using Fluorescence Resonance Energy Transfer

Trihexyltetradecylphosphonium Chloride Based Ratiometric Fluorescent Nanosensors for Multiplex Anion Discrimination

Advancing 2D Imaging of Ammonium for Biological Application: Planar and Nanoparticle-Based Ion-Selective Optodes

An absorption-based surface plasmon resonance sensor applied to sodium ion sensing based on an ion-selective optode membrane.

Visible light activated ion sensing using a photoacid polymer for calcium detection.

Mechanistic insights into the development of optical chloride sensors based on the [9]mercuracarborand-3 ionophore.

Fluorescence Anisotropy as a Self-Referencing Readout for Ion-Selective Sensing and Imaging Using Homo-FRET between Chromoionophores

Rhodamine-based ratiometric fluorescent ion-selective bulk optodes

Polymeric optodes based on upconverting nanorods for fluorescent measurements of pH and metal ions in blood samples.