Abstract:Nickel-titanium shape memory alloy (NiTi-SMA) can restore its original shape after deformation, making it show great application in the fields of biomedicine, aerospace, etc. The wire electrical discharge machining (WEDM) has the advantage of machining micro and complex structures, which can greatly promote the application of NiTi-SMA. However, there are issues such as heat affected layer (HAL) on the surface of WEDM, which can affect the functionality of NiTi-SMA. Therefore, when using WEDM to NiTi-SMA, more attention should be paid to the functional changes after machining. This article primarily examine is the impact of peak current and pulse on time on the phase transformation behavior, shape memory effect, and mechanical properties of NiTi-SMA during WEDM, and introduces into the magnetic field assisted (MFA) process to improve the machining performance of NiTi-SMA. The results indicate that the HAL formed on the surface of NiTi-SMA is primarily composed of the irreversible phase transformation of B2 austenite. This layer induces a hardening effect, resulting in an increase in the phase transition temperature and a decrease in the phase transition energy (∆H M-A ), as a result, the martensitic phase transformation behavior is suppressed. When the peak current and pulse on time increase, the surface quality of the NiTi-SMA processed decreases. The thickness of the HAL and microhardness increase, causing an increase in the phase transition temperature of the NiTi-SMA processed samples. Additionally, the transformation energy ∆H M-A , shape recovery rate, and mechanical properties decrease, and after recovery, more surface cracks appear and show larger extensions. MFA-WEDM can improve the surface quality of NiTi-SMA processing, reduce the thickness of the HAL, and effectively enhance the phase transformation temperature and energy ∆H M-A of the NiTi-SMA processed samples. With a magnetic field strength of 0.45 T, the tensile shape recovery rates of 98%, 94.4%, and 91.0% were achieved at 2%, 5%, and 8% strain, respectively. This represents an improvement of 8.9% compared to the maximum shape recovery rate with conventional WEDM. At the same time, it also inhibits the generation and propagation of surface cracks after deformation recovery. Additionally, MFA-WEDM improves the mechanical properties of NiTi-SMA, and reduces the thickness of the brittle fracture region by 49.7% compared to conventional WEDM. Therefore, MFA-WEDM can effectively enhance the shape memory effect of NiTi-SMA. However, it is important to avoid excessive peak currents and pulse on time to achieve optimal shape memory functionality.

Electrochemical machining of variable wire diameter structure on smart micro SMA coil

Cryogenic Joule Annealing Induced Large Magnetic Field Response Of Co-Based Microwires For Giant Magneto-Impedance Sensor Applications

Combined Current-Modulation Annealing Induced Enhancement Of Giant Magnetoimpedance Effect Of Co-Rich Amorphous Microwires

A study on wire electrochemical micromachining for fabrication of microgrooves

A numerically controlled shape memory alloy wire bending process using vat photopolymerization

Study on removal of recast layer of NiTi shape memory alloy machined with magnetic field-assisted WEDM-ECM complex process

Enhancement of wire electrochemical micromachining of 40CrNiMoA with electrolyte ultrasonic assistance

Wire electrochemical micromachining of nitinol shape memory alloy using different electrolytes

Investigation to the Influence on Energy Conversion Efficiency for Shape Memory Alloy Coil with Pulse Width Modulated Control

A Multifunctional Characterization Test Bench for Shape Memory Alloy Micro-Wires-Design, Implementation and Validation

Phase transformation behavior and shape memory effect of nickel-titanium shape memory alloy using the magnetic field assisted wire electrical discharge machining

Analysis and Reduction of Process Energy Consumption and Thermal Deformation in a Micro-Structure Wire Electrode Electric Discharge Machining Thin-Wall Component

A Profile Shaping and Surface Finishing Process of Micro Electrochemical Machining for Microstructures on Microfluidic Chip Molds

Electrochemical micro-machining of high aspect ratio micro-tools with a reverse conical shape tip using electrolyte liquid membrane

Research On Micro Electrode Fabrication Based On Ecm

A Hybrid Dynamical Modeling Framework for Shape Memory Alloy Wire Actuated Structures

A Highly Integrated Shape Memory Alloy Actuator with Precision Real-time Self-sensing Control

Surface microstructural design to improve mechanical and giant magneto-impedance properties of melt-extracted CoFe-based amorphous wires

Electro‐Thermo‐Mechanical Characterization of Shape Memory Alloy Wires for Actuator and Sensor Applications – Part 2: High Ambient Temperature Behavior

Numerical and experimental analysis of high-aspect-ratio micro-tool electrode fabrication using controlled electrochemical machining

Sinking ECDM micro-milling of micro-channels with a customized electrode