Abstract:A great variety of columns for liquid chromatography (LC) are available in dimensions ranging from industrial scale to micro‐bore, nano‐bore, and capillary size, and on‐chip columns. The columns may be used in various liquid chromatography modes or in capillary electrochromatography, depending on the support materials and stationary phase chemistry. Every year many new column types are introduced on the market, with improved selectivity and efficiency, long lifetime, and mobile phase compatibility, intended for general use, for liquid chromatography/mass spectrometry (LC/MS) applications, proteomic research, or for the analysis of other specific sample types. Considerable improvement in pH, high‐temperature, and high‐pressure stability of new column types, together with advances in the instrumentation, enabled introduction of capillary, high‐temperature, and ultra‐high‐pressure HPLC into routine practice. Even though reversed‐phase mode is still by the most widely used in contemporary LC, applications of other separation modes (such as ion, normal‐phase, or high‐interaction liquid chromatography (HILC)) have become more frequent recently, because of unique separation selectivity for certain sample types. Characterization of column quality is not a simple task, because a number of factors should be taken into account, that affect the selectivity, efficiency and resolution of sample separation and the reproducibility of chromatographic data. These include the type of the support, the arrangement and density of the stationary phase on the adsorbent surface, the homogeneity of the chromatographic bed, etc. Various physicochemical techniques are used for characterization of the properties of column packings however, most of them are suitable for bulk materials only and cannot be directly applied for commercial columns without damaging them. Not to destroy the columns, often precious and expensive, practicing chromatographers can apply chromatographic methods to characterize columns and evaluate their analytical suitability under real‐life conditions, where the intermolecular interactions between the analytes, the stationary phase, and the mobile phases affect the retention. The present review reports various chromatographic tests and strategies available for column evaluation.

High pressure microbore packed column gas chromatography using common liquid chromatography stationary phases

Unified high-pressure gas and supercritical fluid chromatography with microbore packed columns

The Study of the Submicroparticle Packed Column

Microbore packed column supercritical fluid chromatography using a new polymer stationary phase

Microchip Gas Chromatography Column Using Magnetic Beads Coated with Polydimethylsiloxane and Metal Organic Frameworks

Extending the upper temperature range of gas chromatography with all-silicon microchip columns using a heater/clamp assembly

A Micro Gas Chromatography with Separation Capability Enhanced by Polydimethylsiloxane Stationary Phase Functionalized by Carbon Nanotubes and Graphene.

Micro Gas Chromatography Column Coated with Ionic Liquid/metal-Organic Framework Composites As the Stationary Phase

Fabrication of micro-gas chromatograph columns for fast chromatography

Single Fiber-in-capillary Annular Column for Gas Chromatographic Separation.

Compact Ultrahigh-Pressure Nanoflow Capillary Liquid Chromatograph.

Narrow Open Tubular Column for Ultra-High Efficiency Liquid Chromatographic Separation under Elution Pressure of Less Than 50 Bar.

Fast Separation on Microelectromechanical System-based Semi-packed Gas Chromatography Wavy Column

Iop Publishing Journal of Micromechanics and Microengineering a Monolithically Fabricated Gas Chromatography Separation Column with an Integrated High Sensitivity Thermal Conductivity Detector

Characterization of High‐Pressure Liquid Chromatography Columns using Chromatographic Methods

A Microfabricated Semi-Packed Column Coated with Porous Layer and Ionic Liquid for the Separation of Characteristic Markers of Non-Alcoholic Fatty Liver Disease

Nano-sized Stationary Phase Packings Retained by Single-Particle Frit for Microchip Liquid Chromatography

Design, Fabrication, and Evaluation of Microfabricated Columns for Gas Chromatography

Chromatographic properties PLOT multicapillary columns

Low Pressure Performances and Applications of Gas Chromatography Using Manganese Sulfate Crystal Hydrate as Stationary Phase

Monolithic column with double mixed-modes of hydrophilic interaction/cation-exchange and reverse-phase/cation-exchange stationary phase for pressurized capillary electrochromatography.