Abstract:Journal of Low Frequency Noise, Vibration and Active Control, Ahead of Print. Metro systems provide an efficient, convenient, and expeditious way to travel around crowded routes. Because these systems are established in cities, residential buildings close to metro viaducts are significantly affected by structure-borne noise (SBN). Although most previous studies developed SBN prediction with a focus on the accuracy and computational efficiency of a specific bridge type, only limited studies on parameters for the SBN on bridges were carried out. Thus, eliminating SBN is still a challenging task for both the design and operation phases of bridge design. Therefore, this study integrates simplified experiments with numerical analyses to evaluate the influential parameters on the structure-borne noise level (SBNL) for two types of bridge girders, that is, the double-box pre-stressed concrete girder and the double-box steel girder. The present study also proposes an optimization method for reducing the SBNL in the bridge design and operation phases and identifies the sources of SBN for these two types of bridges. In this paper, the solutions to mitigating SBN are first reviewed and briefly introduced. Theories associated with SBN are then derived and experimentally verified using a concrete or steel plate with a unit area. A hybrid evaluation method is developed to integrate transient finite-element simulation with experimental results, and the main sources (e.g., plate thickness, train speed, fastener stiffness, and track irregularity) that induce SBN are examined by this hybrid method. Consequently, the approach to resolving the SBN problem can be optimally determined. As demonstrated in the results from the hybrid evaluation method, the track condition dominates the SBNL for both types of bridges, and the relationship between train speed and plate eigenfrequency should be carefully investigated to avoid the effect of plate resonance. The pre-stressed concrete box girder is the recommended bridge type for use in urban areas from the viewpoint of minimizing the SBNL.

A 2.5D method for the prediction of structure-borne noise from multi-span concrete rail transit bridges

A Numerical Method for Analyzing the Low-Frequency Noise of Bridge under Vehicle Load

Study on low-frequency noise radiated from steel multi-box girder bridge induced by traffic vibration

Assessment on Transient Sound Radiation of a Vibrating Steel Bridge Due to Traffic Loading

Theoretical analysis of low-frequency noise radiated from bridge vibrations

Analysis on Low-Frequency Noise Induced by Vehicle-Bridge Coupling Vibration

Assessment of Sound Pressure of Transient Noise Radiated from Vehicle-Bridge Coupling Vibration

Characterizing low-frequency structure-borne noise from multi-span bridges on high-speed railways

Dynamic Receptance Analysis Combined with Hybrid FE-SEA Method to Predict Structural Noise from Long-Span Cable-Stayed Bridge in Urban Rail Transit

Combining iterative modal strain energy method with BEM-SEA to predict structural noise from railway composite bridge damped with CLD

Investigating noise radiation pattern of railway bridges for urban rail transit

Study on Structure-Borne Noise Characteristics of Long-Span Steel Truss Bridge in Urban Rail Transit

A Methodology Based on Structural Finite Element Method-Boundary Element Method and Acoustic Boundary Element Method Models in 2.5D for the Prediction of Reradiated Noise in Railway-Induced Ground-Borne Vibration Problems

Low-frequency noise radiation from traffic-induced vibration of steel double-box girder bridge

Vibration Characteristics of Damping Pad Floating Slab on the Long-Span Steel Truss Cable-Stayed Bridge in Urban Rail Transit

Noise Contribution Analysis of a U-shaped Girder Bridge with Consideration of Frequency Dependent Stiffness of Rail Fasteners

Prediction and analysis of structural noise of a box girder using hybrid FE-SEA method

Using a 2.5D boundary element model to predict the sound distribution on train external surfaces due to rolling noise

Structure-borne noise of steel and concrete box girders in an urban metro system: A hybrid evaluation and parametric study

Investigation of the effect of vibration-reducing tracks on the vibration and noise from a large-span steel bridge

Comparison of vibration and noise characteristics of urban rail transit bridges with box-girder and U-shaped sections