Abstract:In order to solve the problem of poor interfacial bonding between the smooth and inert basalt fibers (BFs) and the polyamide 6 (PA6) matrix, carboxylated carbon nanotubes (CNTs) were modified onto the surface of BFs using a simple, environmentally friendly, continuously processable, and non-damaging fiber skeleton sizing method via water-soluble polyurethane dispersion. It was found that the highly chemically active carboxylated CNTs were uniformly dispersed on the surface of BFs with adjustable surface roughness and wettability. With enhanced interfacial bonding effect between the BFs and PA6 matrix by surface sizing of 1.5 g/L CNTs, the tensile strength and tensile modulus of the BF-reinforced composites were improved by about 17.5% and 32.6%, and the flexural strength and flexural modulus increased by about 36.0% and 62.5%, with a higher storage modulus and lower loss factor. With the sizing modification of CNTs, the friction and wear reduction properties of the BF-reinforced PA6 composites were also enhanced, and the wear resistance improvement was up to 40.5%. The introduction of CNTs could make a tight bond between the BFs and PA6 matrix to bear frictional shear damage and produce small size abrasive chips. The CNT sizing–modified BF-reinforced PA6 composites presented shallow and narrow 3D wear surface with low surface roughness parameters. The roughened and activated BFs may form a mechanically engaging interface with the polymer matrix molecular chain segments, which could bear more shear damage and relieve the fatigue wear and adhesive wear for the CNT sizing–modified BF-reinforced composites. The above simple and effective strategies and research laws for enhancing interfacial bonding could promote wider applications of BF-reinforced polymer composites in lightweight and high strength, friction and wear reduction, and high temperature resistance.

Interfacial modi ﬁ cation of basalt ﬁ ber ﬁ lling composites with graphene oxide and polydopamine for enhanced mechanical and tribological properties

Mechanical and tribological properties of basalt fiber fabric reinforced polyamide 6 composite laminates with interfacial enhancement by electrostatic self-assembly of graphene oxide

Improved interfacial shear strength of CF/PA6 and CF/epoxy composites by grafting graphene oxide onto carbon fiber surface with hyperbranched polyglycerol

Interfacial modification to improve the mechanical performance of basalt fiber/epoxy 3D woven composites

Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide

Effects of functionalized graphene oxide modified sizing agent on the interfacial and mechanical properties of carbon fiber reinforced polyamide 6 composites

Surface Modification of Basalt Fibres with ZnO Nanorods and Its Effect on Thermal and Mechanical Properties of PLA-Based Composites

Interfacial reinforcement strategy of basalt fiber/polymer composite constructed by interlocking interface composed of ZnO nanowires

Simultaneously enhancing tribological and mechanical properties of epoxy composites using basalt fiber/reduced graphene oxide/paraffin wax

Highly Enhancing the Interfacial and Mechanical Properties of Basalt Fiber/Poly(phthalazinone ether nitrile ketone) Composite by Thermoplastic Sizing Agents with Different Structures

Grafting of size-controlled graphene oxide sheets onto carbon fiber for reinforcement of carbon fiber/epoxy composite interfacial strength

Improving mechanical and thermal properties of short carbon fiber/polyamide 6 composites through a polydopamine/nano‐silica interface layer

Enhanced mechanical properties of polyphenylene sulfide and liquid crystal polymer composites by interfacial bonding capacity of graft‐modified graphene oxide and glass fibers

Surface sizing introducing carbon nanotubes for interfacial bond strengthening of basalt fiber–reinforced polymer composites

Enhanced interfacial interactions of carbon fiber/ epoxy resin composites by regulating PEG‐E51 and graphene oxide complex sizing at the interface

Layer-by-Layer Assembled Graphene Oxide on Carbon Fiber toward Phosphate Bonded Coatings with Excellent Interfacial Bond and Tribological Performance

Effect of different lateral dimension graphene oxide sheets on the interface of carbon fiber reinforced polymer composites

Graphene Oxide/Polymer-Based Multi-scale Reinforcement Structures for Enhanced Interfacial Properties of Carbon Fiber Composites

Improving mechanical behavior of adhesively bonded composite joints by incorporating reduced graphene oxide added polyamide 6,6 electrospun nanofibers

Microstructural, Mechanical, and Tribological Performances of Composites Prepared via Melt Compounding of Polyamide 6, Basalt Fibers, and Styrene–Ethylene–Butylene–Styrene Copolymer

Excellent and effective interfacial transition layer with an organic/inorganic hybrid carbon nanotube network structure for basalt fiber reinforced high-performance thermoplastic composites