Abstract:Schematic diagram of carbon fibre composite structure. The impact of carbon fiber (CF) composites sizing with graphene oxide (GO) to form brick‐and‐mortar structures on their mechanical properties and thermal conductivity has not been closely examined. This study systematically investigates the effect of GO sheet size on the interfacial properties and thermal conductivity of CF composites. Three sizes of GO—small (0.11 μm), medium (0.33 μm), and large (0.97 μm)—were used to modify CF surfaces via layer‐by‐layer self‐assembly, forming the brick‐and‐mortar structures. The mechanical properties were assessed through flexural tests, interlaminar shear strength (ILSS) tests and tensile tests, while thermal conductivity was measured using a thermal constant analyzer. The results revealed that medium‐sized GO (GO‐M) significantly enhanced the interfacial strength and toughness of the composites. This improvement is attributed to the orderly arrangement of GO‐M on the CF surface, which enhances stress transfer between the fiber and the matrix. In contrast, small‐sized GO (GO‐S) tended to scatter, resulting in less effective reinforcement, while large‐sized GO (GO‐L) exhibited stacking and agglomeration, limiting its reinforcement effectiveness. However, GO‐L provided the highest thermal conductivity due to the formation of continuous heat conduction pathways. These findings suggest that GO‐M offers a balanced improvement in mechanical properties, whereas GO‐L is more suitable for applications requiring high thermal conductivity. This work underscores the importance of selecting the appropriate GO sheet size to optimize the interfacial properties and thermal conductivity of CF composites, which is crucial for enhancing their performance in high‐end engineering applications, such as aerospace, automotive, and marine industries. Highlights Modification of CF composites by GO‐M sheets significantly improved toughness and strength. GO‐L sheets formed an effective heat transfer channel with the highest thermal conductivity. The study emphasized the critical role of selecting the appropriate GO sheet size to optimize the mechanical and thermal properties of CF composites.

Effect of different lateral dimension graphene oxide sheets on the interface of carbon fiber reinforced polymer composites

Sliding Behavior at the Graphene Oxide and Polyethylene Interface

Interfacial microstructure and properties of carbon fiber composites modified with graphene oxide

Self-assembled Complexes of Graphene Oxide and Oxidized Vapor-Grown Carbon Fibers for Simultaneously Enhancing the Strength and Toughness of Epoxy and Multi-Scale Carbon Fiber/epoxy Composites

Impact of graphene oxide lateral sizes on the mechanical and thermal properties of carbon fiber composites

Grafting of size-controlled graphene oxide sheets onto carbon fiber for reinforcement of carbon fiber/epoxy composite interfacial strength

Improving the damping properties of carbon fiber reinforced polymer composites by interfacial sliding of oriented multilayer graphene oxide

Effects of Surface Properties of Fiber on Interface Properties of Carbon Fiber/Epoxy Resin and Its Graphene Oxide Modified Hybrid Composites

Superior interlayer and compression properties of CFRPs due to inter-fiber "bridges" built by functionalized micro-nano scale graphene oxide synergistically

Reinforcing carbon fiber epoxy composites with triazine derivatives functionalized graphene oxide modified sizing agent

Precisely adjusting the interface adhesion of carbon fiber/epoxy composites by regulating the micro-configuration of graphene oxide nanosheets on the fiber surface

Improved interfacial shear strength of CF/PA6 and CF/epoxy composites by grafting graphene oxide onto carbon fiber surface with hyperbranched polyglycerol

Enhanced interfacial interactions of carbon fiber/ epoxy resin composites by regulating PEG‐E51 and graphene oxide complex sizing at the interface

Graphene Oxide/Polymer-Based Multi-scale Reinforcement Structures for Enhanced Interfacial Properties of Carbon Fiber Composites

Investigation into effect of the graphene oxide addition on the mechanical properties of the fiber metal laminates

The effect of graphene oxide modified short carbon fiber on the interlaminar shear strength of carbon fiber fabric/epoxy composites

Interfacial reinforcement of composites by the electrostatic self-assembly of graphene oxide and NH3 plasma-treated carbon fiber

Effects of functionalized graphene oxide modified sizing agent on the interfacial and mechanical properties of carbon fiber reinforced polyamide 6 composites

Nano-level insights on the interfacial wettability of graphene oxide-coated carbon fiber/epoxy composite

A novel π bridging method to graft graphene oxide onto carbon fiber for interfacial enhancement of epoxy composites

Influence of graphene oxide content on the morphology and properties of carbon fiber/epoxy composites