Abstract:A micromixer is one of the most significant components in a microfluidic system. A three-dimensional micromixer was developed with advantages of high efficiency, simple fabrication, easy integration, and ease of mass production. The designed principle is based on the concepts of splitting–recombination and chaotic advection. A numerical model of this micromixer was established to characterize the mixing performance for different parameters. A critical Reynolds number (Re) was obtained from the simulation results. When the Re number is smaller than the critical value, the fluid mixing is mainly dependent on the mechanism of splitting–recombination, therefore, the length of the channel capable of complete mixing (complete mixing length) increases as the Re number increases. When the Re number is larger than the critical value, the fluid mixing is dominated by chaotic advection, and the complete mixing length decreases as the Re number increases. For normal fluids, a complete mixing length of 500 µm can be achieved at a very small Re number of 0.007 and increases to 2400 µm as the Re number increases to the critical value of 4.7. As the Re number keep increasing and passes the critical Re number, the complete mixing length continues to descend to 650 µm at the Re number of 66.7. For hard-to-mix fluids (generally referring to fluids with high viscosity and low diffusion coefficient, which are difficult to mix), even though no evidence of strong chaotic advection is presented in the simulation, the micromixer can still achieve a complete mixing length of 2550 µm. The mixing performance of the micromixer was also verified by experiments. The experimental results showed a consistent trend with the numerical simulation results, which both climb upward when the Re number is around 0.007 (flow rate of 0.03 μm/min) to around 10 (flow rate of 50 μm/min), then descend when the Re number is around 13.3 (flow rate of 60 µm/min).

A stretchable micrometer with enhanced performance for intermediate Reynolds numbers

A Novel Passive Micromixer with Modified Asymmetric Lateral Wall Structures

Micromixer Based on Viscoelastic Flow Instability at Low Reynolds Number

A New Micromixer with Helical Microchannel and Research on Its Numerical Flow Field

Micromixing Enhancement in a Novel Passive Mixer with Symmetrical Cylindrical Grooves

An Enhanced Electroosmotic Micromixer with an Efficient Asymmetric Lateral Structure.

Chaotic Micromixers Using Two-Layer Crossing Channels to Exhibit Fast Mixing at Low Reynolds Numbers

Numerical Investigation of Multiscale Lateral Microstructures Enhancing Passive Micromixing Efficiency Via Secondary Vortex Flow

Numerical Investigation on the Efficient Mixing of Overbridged Split-and-recombine Micromixer at Low Reynolds Number

Numerical Investigation of Flow Patterns and Mixing Characteristics in a 3D Micromixer with Helical Elements over Wide Reynolds Numbers

An Effective Splitting-And-Recombination Micromixer With Self-Rotated Contact Surface For Wide Reynolds Number Range Applications

Numerical Simulation and Structural Recombination of Microchannel Micromixer for Excellent Mixing Performance

Experiment Investigation of Enhancement Micromixing by Microbubble Actuators

A Three-Dimensional Micromixer Using Oblique Embedded Ridges

Characterization of Folding and Stretching in Mixing Enhancements

An efficient micromixer combining oscillatory flow and divergent circular chambers

Multiple-stream flow and mixing of dissimilar polymeric solutions in abrupt microfluidic contraction/expansion geometries

Micromixer with Fine-Tuned Mathematical Spiral Structures.

Efficient Mixing of Viscoelastic Fluids in a Microchannel at Low Reynolds Number

An Efficient Micro-Mixer by Elastic Instabilities of Viscoelastic Fluids: Mixing Performance and Mechanistic Analysis

Chaotic Micromixer Based On 3d Horseshoe Transformation