Abstract:The erosive wear rate caused by slurry flow is the worst phenomenon associated with complex geometry like bend, curved cross section and rotating machinery. The numerous quantitative research is available in the past for findings of erosive wear rate through pipe bend, but findings of erosive wear rate through pipe bend using Fluent based various erosion models are not yet established. In the present work, erosion wear rate using four computational-based erosion models viz. Generic, Oka, Finnie and Mclaury through horizontal mitre pipe bend instigated by bottom ash particulates slurry has been investigated using Fluent code. The solid particulates of spherical shapes 162 µm, 300 µm and 445 µm having density 2219 kg/m3 were tracked to compute the erosion wear rate using Discrete Phase Model (DPM). The particulates were tracked using Eulerian–Lagrangian approach coupled with k−ɛ turbulent model at volume fraction ranging from 2.5 to 10% for wide range of velocities viz. 1–10 ms−1. Additionally, the results of DPM concentration, turbulence intensity, velocity and particle tracking using particulate residence time were predicted to analyze the erosive rate through pipe bend. The simulated outcomes show that the maximum erosion wear rate exists at the extrados of pipeline near the bend exit. Finally, the effects of particulate size, concentration and velocity were discussed on erosion wear rate. Furthermore, the simulated outcomes obtained through computational erosion models were verified with the available experimental data and findings show that the outcomes obtained with Generic model could be the benchmark for designing the slurry pipeline bend.

A Combined CFD-Mechanistic Approach for Predicting Solid Particle Erosion in Annular Flow in Pipe Fittings and Elbows

Coarse-grained CFD-DEM Simulation of Elbow Erosion Induced by Dilute Gas-Solid Flow: A Multi-Level Study

Numerical simulation research for the effect of particle shape on the erosion wear in elbow

Modeling of liquid-solid flow erosion in curved pipes of gradually varying cross section

Predicting Local Distributions of Erosion–corrosion Wear Sites for the Piping in the Nuclear Power Plant Using CFD Models

A New Approach for Investigation of Erosion-Corrosion Using Local Flow Models

Three-dimensional numerical investigation of solid particle erosion in gate valves

Failure analysis and prediction of pipes due to the interaction between multiphase flow and structure

Numerical investigation of novel geometric solutions for erosion problem of standard elbows in gas-solid flow using CFD-DEM

A novel numerical investigation of erosion wear over various 90-degree elbow duct sections

Predicting Erosion-Corrosion Induced by the Interactions Between Multiphase Flow and Structure in Piping System

Numerical Simulation of Elbow Erosion in Shale Gas Fields under Gas-Solid Two-Phase Flow

An algorithm combining sedimentation experiments for pipe erosion investigation

Multi-Scale Simulation of Fluid-Structure Interaction Induced Erosion on the Pipe Surface

A Numerical Study of Sand Particle Erosion in Elbow and a Series of Plugged Tees in Gas-Particle Two-Phase Flow

CFD-DPM modelling of solid particle erosion on weld reinforcement height in liquid-solid high shear flows

A Numerical Procedure for Estimating the Sand Erosion of Elbows in Annular Flow with the Complete Thickness Distribution of the Liquid Film

Numerical Prediction of Erosion in Elbow Based on Cfd-Dem Simulation

Computational Erosion Wear Model Validation of Particulate Flow Through Mitre Pipe Bend

Application of Local Flow Models in Predicting Distributions of Erosion-Corrosion Locations

A New Method for Predicting Erosion Damage of Suddenly Contracted Pipe Impacted by Particle Cluster via CFD-DEM