Abstract:International Journal of Aeroacoustics, Ahead of Print. The accurate prediction of the trailing-edge noise and the determination of its sources are essential to reduce fans and propellers noise. This noise component is due to the scattering of the turbulent boundary layer into acoustic waves by the trailing edge. In this paper, the noise emanating from a CD (Controlled-Diffusion) airfoil is simulated and computed via the hybrid methods of aeroacoustics. In these methods, the aerodynamic and acoustic fields are computed separately. The flow data are obtained using the in-house LES solver SFELES. ACTRAN acoustic solver has been used to solve the acoustics and to provide the near and far fields propagation via Lighthill's analogy. Curle's analogy is applied as well in its integral compact formulation which takes the presence of walls into account. Curle's formulation is applied proposing an approach where the volume and surface integrals have been implemented in SFELES to be calculated simultaneously with the flow in order to avoid the storage of noise sources which requires a huge space. In Lighthill's analogy, sources and near field maps show that the turbulent boundary layer and wake are the more efficient sources and the center of radiation is the trailing edge. The comparison of the numerical results with the experimental measurements, performed by Moreau and Roger and Moreau et al. , shows an overall excellent agreement confirming the capability of SFELES (LES sources) combined with ACTRAN (Lighthill's analogy) to predict correctly the noise generated by turbulent flows around airfoils. The acoustic spectrum presents an overprediction up to 5 dB at the frequencies 300 Hz and 550 Hz and an underprediction about 5 dB at the frequencies 1100 Hz and 1750 Hz. The sound pressure level (SPL) obtained using the proposed approach of Curle's analogy matches very well the experimental results. Thus, Curle's analogy can be used to obtain a fast, approximated and acceptable results about the noise radiation of airfoils avoiding the storage of noise sources which requires a huge space and time.

IUTAM Symposium on Computational Aero-Acoustics for Aircraft Noise Prediction Time-Domain Computation of Multimode Propagation in an Aero- engine Duct

Aerodynamic Noise Prediction of a Centrifugal Fan Considering the Volute Effect Using IBEM

An improved multimodal method for sound propagation in nonuniform lined ducts

Efficient Computation of Spinning Modal Radiation Through an Engine Bypass Duct

Aeroacoustic prediction for cooling fan using convolution quadrature boundary element method

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

A Compressive-Sensing-based Method for Radial Mode Analysis of Aeroengine Fan Noise

Recognizing the aeroacoustic information of noise radiated by an unflanged duct based on convolutional neural networks

A Time-Domain Linear Method for Jet Noise Prediction and Control Trend Analysis

A Modified Time Domain Approach for Calculation of Noise Reduction and Acoustic Impedance of Intake Duct System

Sound Radiation from a Generic Bypass Duct with Bifurcations

Numerical Prediction of Aerodynamic Noise for a Propeller-wing Configuration and an Investigation of Pitch Effect

Numerical Aeroacoustic Noise Prediction for Complex HVAC Systems

Improved Prediction of Coherent Structure in An Intermediate Turbine Duct

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

Combustion Rumble Prediction with Integrated Computational-Fluid-Dynamics/Low-Order-Model Methods

COMPUTATION OF MODAL RADIATION THROUGH AN ENGINE EXHAUST ON ADAPTIVELY REFINED MESHES

Wind-Tunnel Investigation on the Compressive-Sensing Technique for Aeroengine Fan Noise Detection

Aeroacoustic Prediction Based on Large-Eddy Simulation and the Ffowcs Williams–Hawkings Equation

Control-Oriented Methods for Turbomachinery Noise Simulation

Numerical Prediction of Sound Generated from Flows with a Low Mach Number