Abstract:The efficacy of steady large-amplitude blowing/suction on instability and transition control for a hypersonic flat plate boundary layer with Mach number 5.86 is investigated systematically. The influence of the blowing/suction flux and amplitude on instability is examined through direct numerical simulation and resolvent analysis. When a relatively small flux is used, the two-dimensional instability critical frequency that distinguishes the promotion/suppression mode effect closely aligns with the synchronisation frequency. For the oblique wave, as the spanwise wavenumber increases, the suppression effects would become weaker and the mode suppression bandwidth diminishes/increases in general in the blowing/suction control. Increasing the blowing/suction flux can effectively broaden the frequency bandwidth of disturbance suppression. The influence of amplitude on disturbance suppression is weak in a scenario of constant flux. To gain a deeper insight into disturbance suppression mechanism, momentum potential theory (MPT) and kinetic energy budget analysis are further employed in analysing disturbance evolution with and without control. When the disturbance is suppressed, the blowing induces the transport of certain acoustic components along the compression wave out of the boundary layer, whereas the suction does not. The velocity fluctuations are derived from the momentum fluctuations of the MPT. Compared with the momentum fluctuations, the evolutions indicated by each component's velocity fluctuations greatly facilitate the investigations of the acoustic nature of the second mode. The rapid variation of disturbance amplitude near the blowing is caused by the oscillations of the acoustic component and phase speed differences between vortical and thermal components. Kinetic energy budget analysis is performed to address the non-parallel effect of the boundary layer introduced by blowing/suction, which tends to suppress disturbances near the blowing. Moreover, viscous effects leading to energy dissipation are identified to be stronger in regions where the boundary layer is rapidly thickening. Finally, it is demonstrated that a flat plate boundary layer transition triggered by a random disturbance can be delayed by a blowing/suction combination control. The resolvent analysis further demonstrates that disturbances with frequencies that dominate the early transition stage are dampened in the controlled base flow.

Control-Oriented Methods for Turbomachinery Noise Simulation

Stability Analysis and Design of Time-Domain Acoustic Impedance Boundary Conditions for Lined Duct with Mean Flow

A Controllable Canonical Form Implementation of Time Domain Impedance Boundary Conditions for Broadband Aeroacoustic Computation.

Numerical Simulation and Structure Optimization of Compressor Muffler

Numerical simulation and mutual conversion of the temporal-spatial modes of hydrodynamic stability in boundary layer flow

THE SIMPLIFIED THEORY ABOUT PROPAGATION OF OSCILLATING DISTURBANCE IN TURBOMACHINERY AND ITS APPLICATION

Modelling and Simulation of Operation Stability of Gas Turbine Combustor Under Varying Duty

A Modified Time Domain Approach for Calculation of Noise Reduction and Acoustic Impedance of Intake Duct System

Developing a modelling approach for sound propagation through turbulent boundary layer and applying to train pantograph

Combustion Rumble Prediction with Integrated Computational-Fluid-Dynamics/Low-Order-Model Methods

CFD-based application of the Nyquist criterion to thermo-acoustic instabilities

An improved multimodal method for sound propagation in nonuniform lined ducts

Boundary proportional control of thermoacoustic instability in a Rijke tube

A physical model for indirect noise in non-isentropic nozzles: transfer functions and stability

Identification of flame transfer function and mechanism analysis of the influence of boundary impedance characteristics on thermoacoustic instability

A Theoretical Study on the Interplay of Thermoacoustic Modes with Helmholtz Dampers in a Longitudinal Combustor

Simulation of HVAC flow noise sources with an exit vent as an example

Adjoint Boundary Sensitivity Method to Assess the Effect of Nonuniform Boundary Conditions

Modeling closed-loop control of installation noise using Ginzburg-Landau equation

Instability and Transition Control by Steady Local Blowing/suction in a Hypersonic Boundary Layer

A Computational Fluid Dynamics Approach for Full Characterization of Muffler Without and with Exhaust Flow