Abstract:The excitation mechanism of acoustic resonances has long been recognized, but the industry continues to be plagued by its undesirable consequences, manifested in severe vibration and noise problems in a wide range of industrial applications. This paper focuses on the nature of the excitation mechanism of acoustic resonances in piping systems containing impinging shear flows, such as flow over shallow and deep cavities. Since this feedback mechanism is caused by the coupling between acoustic resonators and shear flow instabilities, attention is focused first on the nature of various types of acoustic resonance modes and then on the aeroacoustic sound sources, which result from the interaction of the inherently unstable shear flow with the sound field generated by the resonant acoustic modes. Various flow-sound interaction patterns are discussed, in which the resonant sound field can be predominantly parallel or normal to the mean flow direction and the acoustic wavelength can be an order of magnitude longer than the length scale of the separated shear flow or as short as the cavity length scale. Since the state of knowledge in this field has been recently reviewed by Tonon et al. (2011, “Aeroacoustics of Pipe Systems With Closed Branches”, Int. J. Aeroacoust., 10(2), pp. 201–276), this article focuses on the more practical aspects of the phenomenon, including various flow-sound interaction patterns and the resulting aeroacoustic sources, which are relevant to industrial applications. A general design guide proposal and practical means to alleviate the excitation mechanism are also presented. These are demonstrated by two examples of recent industrial case histories dealing with acoustic fatigue failure of the steam dryer in a boiling water reactor (BWR) due to acoustic resonance in the main steam piping and acoustic resonances in the roll posts of the Short Take-Off and Vertical Lift Joint Strike Fighter (JSF).

Simulation of HVAC flow noise sources with an exit vent as an example

Numerical Simulation of Flow-Induced Noise in High Pressure Reducing Valve

Numerical Aeroacoustic Noise Prediction for Complex HVAC Systems

Numerical simulation of the sound field inside a natural ventilation window

Simulation and Design Improvement of a Low Noise Control Valve in Autonomous Underwater Vehicles

Numerical Simulation of Leakage Noise Field for Solenoid Valve

Numerical simulation for nonlinear problems of noise reduction by anti-sound using bypass in ducts with flow

Numerical simulation of aerodynamic noise and noise reduction of range hood

Simulation Model of Sound Field in Street Space Caused by Noise Transmitted from Bordering Large Workshop Buildings

Acoustic source characterization of simulated subsonic jet noise using spherical harmonics

Development of flow-vibroacoustic coupled numerical methods for prediction of noise radiation due to flow-born vibration of compressor discharge piping system

Analytical and Numerical Investigations on the Aeroacoustical Oscillation of Flow Past the Cavity

Flow-Acoustics: Theory and Benchmarking

Control-Oriented Methods for Turbomachinery Noise Simulation

Flow-Excited Acoustic Resonance Excitation Mechanism, Design Guidelines, and Counter Measures

Prediction of Flowfield and Acoustic Signature of a Split-type Air Conditioner

Numerical investigation of flow induced noise in control valve

Acoustic noise analysis in multiphase fluid flow patterns within circular pipe

Numerical analysis of acoustic noise from an electronic cooling fan at flow disturbed by an external obstacle

A Hydrodynamic/Acoustic Splitting Method with Fluid-Structure Feedback for Flow-induced Noise

Modeling the Acoustical and Airflow Performance of Natural Ventilation Inlet and Outlet Units