Abstract:The internal, low Mach number, turbulent flow-induced acoustic field of a cylindrical 90° pipe bend with a curvature radius Rm/D=1.02 is investigated using hybrid Computational Aero-Acoustics (CAA). Incompressible Large-Eddy Simulation (LES) is used to computationally describe the turbulent flow field at bulk Reynolds numbers ReB=5000,12000,26000 and 66000 . The incompressible LES predicts all salient flow features, like the separation from the inner wall of the bend followed by a turbulent recirculation zone, in good agreement with literature. The internal flow-induced noise is predicted by solving Acoustic Propagation Equations (APE) applying Lighthill's Equation (LE), Ribner's Dilatation Equation (RDE) and the Perturbed Convective Wave Equation (PCWE), provided with acoustic source terms obtained from the incompressible LES. The turbulent recirculation zone is the most active region for generating acoustic sources. Among the two constituent components of the PCWE source term, the local pressure time derivative term turned out as clearly dominant in this region, so that PCWE and RDE predicted similar acoustic fields. The sub-grid scale (SGS) model applied in LES notably contributes only at high frequencies to the total LE source term, starting from f=2000 Hz for the lower Reynolds numbers and beyond for the higher. The mapping of source terms from the boundary layer resolving LES grid onto the typically coarser preferably uniform APE grid leads to lower high-frequency signal amplitudes for coarser APE mesh size in regions with small turbulent structures. The impact of this amplitude reduction on the predicted acoustics sound power levels was still very small, exhibiting relative differences less than 0.7% for the different APE meshes. Despite the LES-specific limitations expected from the decrease of directly resolved content for higher Reynolds number, the use of increasingly underresolved source terms did not significantly lower the accuracy of finally predicted acoustics. The comparison of the acoustic results against data from dedicated measurements generally showed very good agreement for all Reynolds numbers.

Validation of the Computational Aeroacoustic Simulation of a Subsonic Jet tailpipe Flow Noise

Large Eddy Simulations of Supersonic Jet Flows for Aeroacoustic Applications

Prediction of the aerodynamic noise of an airfoil via the hybrid methods of aeroacoustics

Numerical simulation and test validation for performance of a muffler in an exhaust pipe

Assessment of Turbulence Models for Cylinder Flow Aeroacoustics

LES-FEM Coupled Analysis and Experimental Research on Aerodynamic Noise of the Vehicle Intake System

Research of the Aeroacoustic Noise Simulation Based on Transition/scale-Adapt Model and FW-H Equation

Nektar++: Development of the Compressible Flow Solver for Jet Aeroacoustics

Aeroacoustic Prediction Based on Large-Eddy Simulation and the Ffowcs Williams–Hawkings Equation

Hybrid aeroacoustic investigation of turbulent 90° pipe bend flow with source terms from Large-Eddy Simulation

Numerical Prediction of Sound Generated from Flows with a Low Mach Number

Aeroacoustic Prediction of a Multi-Element Airfoil Using Wall-Modeled Large-Eddy Simulation

Large Eddy Simulation for Jets from Chevron and Dual Flow Nozzles

Numerical Aeroacoustic Noise Prediction for Complex HVAC Systems

Numerical study of flow and noise predictions for tandem cylinders using incompressible improved delayed detached eddy simulation combined with acoustic perturbation equations

Utilization of Turbulent Energy Transfer Rate Time-Scale in Aeroacoustics with Application to Heated Jets

Validating Confined Flame Noise Simulation Using External Sensor

Acoustic source characterization of simulated subsonic jet noise using spherical harmonics

Numerical underwater radiated noise prediction in multi-phase flow conditions

Modeling and prediction of the peak radiated sound in sub-sonic axisymmetric air jets using acoustic analogy based asymptotic analysis

Computational flow noise