Abstract:Polyhedral oligomeric silsesquioxane (POSS) is a nanostructured soft material that tremendously influences the properties of polymers. This paper delineates the preparation of polyurethane–POSS hybrid materials by physical blending and in-situ polymerization, and studies their properties. In the physical blending method, a polyurethane (BDO–PU) was prepared by using polycaprolactone diol (PCL-diol) as a soft segment, 4,4(^prime )-methylenebis(phenyl isocyanate) (MDI) as a diisocyanate and 1,4-butanediol (BDO) as a chain extender. The PU–POSS hybrid material (BDO–PU/POSS) was then prepared by the dispersion of POSS (octahydroxy POSS) molecules in the synthesized BDO–PU matrix by the solution mixing method. In the in-situ polymerization method, POSS–PU and POSS–BDO–PU hybrid materials were prepared using POSS and the combination of POSS and BDO as a crosslinker or a chain extender. The formation of PU and PU–POSS hybrid materials was confirmed by Fourier transform infrared and differential scanning calorimetry analyses. The introduction of octahydroxy POSS molecules into the PU matrix resulted in a reduction of glass transition temperature ((T_{mathrm {g}})). However, POSS–PU hybrid materials prepared by the in-situ polymerization method had significantly less (T_{mathrm {g}}) compared to the hybrid materials prepared by the solution or physical blending method. The incorporation of POSS molecules by using the in-situ polymerization process resulted in an increase in the surface hydrophobicity (water contact angle, WCA (=) 125(^{circ })) compared to the same prepared by using the solution blending process (WCA (=) 106(^{circ })). Moreover, the WCA values of all hybrid materials (WCA (=) 106–125(^{circ })) are much higher than those of the pristine BDO–PU (WCA (=) 84(^{circ })). The higher WCA value of the hybrid materials is due to the combined effect of the hydrophobic nature of POSS molecules as well as the increased surface roughness, as evidenced by the AFM 3D images. The hybrid materials prepared by the in-situ polymerization method exhibited improved mechanical and thermal properties compared to those prepared by the solution blending method.

Strong screening effect of polyhedral oligomeric silsesquioxanes (POSS) nanoparticles on hydrogen bonded polymer blends

Studies of polyhedral oligomeric silsesquioxane and polyhedral oligomeric silsesquioxane- polymer

The Preparation and Characterization of PMMA/POSS-OH Hybrid Fiber

Sub-10 Nm Feature Sizes of Disordered Polystyrene-block-poly(methyl Methacrylate) Copolymer Films Achieved by Ionic Liquid Additives with Selectively Distributed Charge Interactions

Synergetic Effect of a Reactive Compatibilizer and Organo-montmorillonite on the Dispersion of Polyamide 6 /Polydimethylsilicone Blend with a High Viscosity Ratio

Co-Continuous Polymeric Nanostructures Via Simple Melt Mixing of Ps/Pmma

Controllable Specific Interactions and Miscibility in Polymer Blends .2. A Brief Description of the Main Results

Effect of polyhedral oligomeric silsesquioxane (POSS) nanoparticle on the miscibility and hydrogen bonding behavior of CO2 based poly(cyclohexene carbonate) copolymers

Hybrid Networks Based on Poly(Styrene-Co-Maleic Anhydride) and N-Phenylaminomethyl Poss

Hydrogen bond interaction and dynamics in PMMA/PVPh polymer blends as revealed by advanced solid-state NMR

Miscibility of blends of poly(methyl methacrylate) and oligodiols based on a bisphenol A nucleus and ethylene oxide or propylene oxide branches

Intermacromolecular complexation due to specific interactions: 3. Miscibility and complexation of PBMA and PS(OH)

Polyurethane–POSS hybrid materials: by solution blending and in-situ polymerization processes

The Self-Assembled Structure of the Diblock Copolymer PCL-b-P4VP Transforms Upon Competitive Interactions with Octaphenol Polyhedral Oligomeric Silsesquioxane

Relating the Degree of Nanofiller Functionality to the Glass Transition Temperature and Structure in a Polymer–Polyhedral Oligomeric Silsesquioxane Nanocomposite

Polyhedral Oligomeric Silsesquioxane (POSS)-Containing Polymer Nanocomposites

Mechanically Robust Hybrid POSS Thermoplastic Polyurethanes with Enhanced Surface Hydrophobicity

Influence Of Polyhedral Oligomeric Silsesquioxane Structure On The Disentangled State Of Ultrahigh Molecular Weight Polyethylene Nanocomposites During Ethylene In Situ Polymerization

Controllable Specific Interactions And Miscibility In Polymer Blends .4. Effect Of Hydrogen-Bonding Density In Interpenetrating Polymer Networks

Preparation and Properties of Polyhedral Oligosilsequioxane Tethered Aromatic Polyamide Nanocomposites Through Michael Addition Between Maleimide‐containing Polyamides and an Amino‐functionalized Polyhedral Oligosilsequioxane

Grafted Polybenzimidazole Copolymers Bearing Polyhedral Oligosilsesquioxane Pendant Moieties