Abstract:Passively Q-switched solid-state lasers (PQSL) can obtain output lasers with narrow pulse widths and high peak powers, where play a vital role in the information society. Saturable absorbers (SA) are an essential part of passively Q-switched solid-state lasers. In this paper, we demonstrated 2 μm passively Q-switched (PQS) solid-state laser based on a graphene/BN heterojunction saturable absorber. In the experiments, we used two output mirrors with transmittance of 1.5%/2.5% for comparative study. We also used monolayer graphene as saturable absorber for experiment to compared with graphene/BN saturable absorber. The experimental results showed that the best passively Q-switched operation was achieved with the graphene/BN heterojunction saturable absorber at output mirror transmittance of 1.5 %. When the maximum absorption pump power was 1.49 W, the maximum average output power was 38 mW, corresponding with a slope efficiency of 5.4%. At this point, the minimum pulse width was 1.56 μs, corresponding with a repetition frequency of 52 kHz. The single pulse energy and the peak power were calculated to be 730.36 nJ and 466.96 mW, respectively. The center wavelength of the PQS laser was 2066.8 nm. The experimental results showed that graphene/BN heterojunction was a promise saturable absorber in the field of 2 μm passively Q-switched solid-state lasers.

WSe_2/BN heterostructure as saturable absorber for a diode-pumped passively Q-switched 2 μm solid-state laser

Application of Few-Layer WSe2/Sapphire in Passively Q-switched Solid-State Lasers As Saturable Absorber and Output Coupler

2 Μm Passively Q-switched All-Solid-state Laser Based on WSe2 Saturable Absorber

An infrared passively Q-switched laser based on graphene/BN heterojunction

High output mode-locked laser empowered by defect regulation in 2D Bi2O2Se saturable absorber

High-Performance WSe2 Photodetector Based on a Laser-Induced P-N Junction.

Broadband saturable absorption responses of few-layered MoSe 2 nanosheets for all-solid-state Q-switched lasers

Optically Pumped Monolayer MoSe2 Excitonic Lasers from Whispering Gallery Mode Microcavities.

Passively Q-switched operation based on Sb2Se3 and self-power near infrared photodetector

Highly Stable Passively Q-Switched Erbium-Doped All-Fiber Laser Based on Niobium Diselenide Saturable Absorber

Wideband saturable absorption in few-layer molybdenum diselenide (MoSe2) for Q-switching Yb-, Er- and Tm-doped fiber lasers

Characterization of SnSe2 saturable absorber by THz-TDS and used in dual-wavelength passively Q-switched laser

Passively Q-switched Nd^3+ solid-state lasers with hexakis-[(trimethylsilyl)ethynyl]benzene and graphdiyne as saturable absorbers

In2Se3 nanosheets with broadband saturable absorption used for near-infrared femtosecond laser mode locking

Passively Q-switched 2 μm laser based on graphene/BN heterostructure as saturable absorber

SnS2 as a Saturable Absorber for Mid-Infrared Q-Switched Er:SrF2 Laser

Femtosecond Pulsed Fiber Laser by an Optical Device Based on NaOH-LPE Prepared WSe2 Saturable Absorber

Few-layer Bi2Te3: an Effective 2D Saturable Absorber for Passive Q-switching of Compact Solid-State Lasers in the 1-Μm Region.

Stable Q-switched and femtosecond mode-locked erbium-doped fiber laser based on a CuSe nanosheets saturable absorber

Passively Mode-Locking in 2 Μm Region Based on Sb2Se3 Saturable Absorber

Enhanced Nonlinear Optical Response of Layered WSe 1.4 Te 0.6 Alloy in 1 Μm Passively Q-switched Laser