Abstract:This paper proposes a novel inductive and capacitive combined wireless power transfer (IC-WPT) system for unmanned aerial vehicle (UAV) applications. First, a new compact inductive and capacitive combined coupler is presented. The magnetic field coupled power transmission of the compact coupler contains one magnetic transmitting unit, which is composed of two biorthogonal L-type cores and two rectangular coils wound on each of the short edges of the L-type ferrite core in the vertical position, and two air-cored receiving coils embedded in the legs. Meanwhile, the electric field coupled power transmission of the compact coupler consists of four pieces of copper foil, where two are attached on the primary side and two are attached on the secondary sides for wireless energy transmission through capacitive coupling. Second, a simple resonant compensation network is developed for the IC-WPT system. To make the secondary side lightweight, the receiver self-inductance of the inductive power transfer (IPT) coupler and compensating capacitance of the capacitive power transfer (CPT) receiver can be used to compensate each other. A prototype of the proposed UAV IC-WPT system is built and tested. Experimental results show that the wireless power transfer system can deliver 130 W at an efficiency of 81.2%, which means it can be adopted to the autonomous charging of UAVs.

A Free-Positioning IPT System via Reconfigurable Coil Array Transmitter for Unmanned Aerial Vehicle Applications

Improving Steady and Starting Characteristics of Wireless Charging for an AUV Docking System

Design of an ICPT system for battery charging applied to underwater docking systems

RIS-aided Wireless Power Transfer for Unmanned Aerial Vehicles

A Hybrid IPT System Implementing Misalignment Tolerance and Constant Current Output with Primary Intermediate Coil

Optimization of a 6.78-MHz Inductive Power Transfer System for Unmanned Aerial Vehicles

Unmanned Aerial Vehicle Wireless Charging System With Orthogonal Magnetic Structure and Position Correction Aid Device

A Hybrid IPT System with High-Misalignment Tolerance and Inherent CC–CV Output Characteristics for EVs Charging Applications

Multiple Coils IPT System Implementing CV Output Characteristics with Improved Misalignment Tolerance

Design and Optimization of a Modular Wireless Power System Based on Multiple Transmitters and Multiple Receivers Architecture

Compact inductive and capacitive combined wireless power transfer system for unmanned aerial vehicle applications

An Underwater Inductively Coupled Power Transfer System with a Ring-Shaped Coupler for ROV Charging.

Design of Charging Coil for Unmanned Aerial Vehicle-Enabled Wireless Power Transfer

Effective-Configuration WPT Systems for Drones Charging Area Extension Featuring Quasi-Uniform Magnetic Coupling

A Multichannel Wireless UAV Charging System With Compact Receivers for Improving Transmission Stability and Capacity

A 500-W Wireless Charging System With Lightweight Pick-Up for Unmanned Aerial Vehicles

A New Magnetic Coupler With High Rotational Misalignment Tolerance for Unmanned Aerial Vehicles Wireless Charging

A Free-Rotation Asymmetric Magnetic Coupling Structure of UAV Wireless Charging Platform with Conformal Pickup

Energy-Efficient Data Collection and Wireless Power Transfer Using A MIMO Full-Duplex UAV

A 5 kW Hull-Compatible Inductive Charging System with 360°Folded Spatial Unipolar Coupler for Autonomous Underwater Vehicles (AUVs)

Wireless Charging System with Three Arc-Transmitting Coils for Autonomous Underwater Vehicle