Abstract:Enhancing ultra-high temperature mechanical properties of turbine blade-manufacturing Ni-based single-crystal superalloys is crucial to advanced aero-engines. However, the service temperature still does not rise to 1200 °C, at which severe microstructure degradation and accelerated plastic deformation due to thermal activation deteriorate creep resistance. This work investigates the effect of γ′-forming elements, including Al and Ta, on 1200 °C/80 MPa creep properties and its corresponding mechanism. The creep property is sensitive to Al and Ta addition, reaching its peak in our designed composition region. The microstructure evolution during creep is also sensitive to Al and Ta; particularly, adding γ′-forming elements facilitates abnormal rattan-shaped γ′ phase formation. Evidenced by typical three-stage creep behavior, “cubic-raft-collapse” microstructural evolution, and dislocation configuration analysis, 1200 °C creep resistance would originate primarily from classical 1100 °C creep strengthening mechanisms. Besides, the detrimental impact of the rattan-shaped γ′ phase is revealed, which should also be considered. Further research indicates that Al addition produces a lower degree of γ′-solubility, more negative lattice misfit, higher γ′-fraction, and more rattan-shaped γ′ phase, while Ta addition produces lower γ′-solubility, more positive misfit, higher γ′-fraction and more rattan-shaped γ′ phase. The alloying composition-phase/interface-properties relationship has been established for 1200 °C creep, which explains the peak performance of SCA4 alloy. These results provide new opportunities to design superalloys that resist ultra-high temperature service and elevate the service temperature limit.

Evolution of Microstructure during Creep Deformation in a Forged 617 Superalloy

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

Creep Behavior and Deformation Mechanism of a Third-Generation Single Crystal Ni-Based Superalloy at 980 °C

In Situ SEM Study of Creep Deformation Behavior of Nickel-Based Single-Crystal Superalloys

Evolution and Structure Characterization of the Carbide and Boride during Creep in A Ni-based Superalloy

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Tensile, Creep Behavior and Microstructure Evolution of an As-Cast Ni-based K417G Polycrystalline Superalloy

Experimental investigation on creep strengthening phenomenon of a Ni-based single crystal superalloy under cyclic loading and unloading conditions

Creep Behavior and Microstructure Evolution of Ni-based Alloy IN617 at 1000 °C

Study of the Creep Behavior of Nickel-Based Single Crystal Superalloy Micro Specimens with Dimensional Effects

High temperature creep behavior and damage mechanism of an advanced PM Ni‐based superalloy

Microstructure Evolution and Dislocation Mechanism of a Third-Generation Single-Crystal Ni-Based Superalloy during Creep at 1170 °C

Design for 1200 °C creep properties of Ni-based single crystal superalloys: Effect of γ′-forming elements and its microscopic mechanism

Effect of stress-hold and strain-hold during Creep-Fatigue Interaction of alloy 617 M

Creep behaviors of fine-grained Ni-base powder metallurgy superalloys at elevated temperatures

Microstructure evolution and deformation mechanism of a [111]-oriented nickel-based single-crystal superalloy during high-temperature creep

Microstructural changes in alloy 625 during high temperature creep

Creep Behavior of a Single Crystal Nickel-Based Superalloy Containing High Concentrations of Re/Ru at an Intermediate Temperature

Intermediate-Temperature Creep Deformation and Microstructural Evolution of an Equiatomic FCC-Structured CoCrFeNiMn High-Entropy Alloy

Creep behaviors and deformation mechanisms at intermediate temperatures in a novel γ‐γ' nickel‐based superalloy

Study on creep characteristics and the isochronous stress–strain curve of Ni-Cr-Mo superalloy