Abstract:Background: the clinical application of orthopedic or dental implants improves the quality of the lives of patients. However, the long-term use of implants may lead to implant loosening and related complications. The purpose of this study is to deposit titanium (Ti)-niobium (Nb)-zirconium (Zr)-tantalum (Ta) alloys on the surface of Ti-6Al-4V to increase structural strength and biocompatibility for the possible future application of implants. Materials and methods: Ti, Nb, Zr, and Ta served as the materials for the surface modification of the titanium alloy. TiNbZr and TiNbZrTa coatings were produced using cathodic arc evaporation, and a small amount of nitrogen was added to produce TiNbZrTa(N) film. Annealing and oxidation were then conducted to produce TiNbZrTa-O and TiNbZrTa(N)-O coatings. In this study, biological tests and finite element analyses of those five alloy films, as well as uncoated Ti-6Al-4V, were performed. Human osteosarcoma cells (MG-63) and mouse fibroblast cells (L-929) were used to analyze cytotoxicity, cell viability, and cell morphology, and the bone differentiation of MG-63 was evaluated in an alkaline phosphatase experiment. Furthermore, for measuring the gene expression level of L-929, reverse transcription quantitative real-time polymerase chain reaction (RT-qPCR) was conducted. The three-dimensional (3D) computational models of the coated and uncoated sample films were constructed using images of transmission electron microscopy and computer-aided design software and, then, the stress distributions of all models were evaluated by finite element analysis. Result: the cytotoxicity test revealed that the surface treatment had no significant cytotoxic effects on MG-63 and L-929 cells. According to the results of the cell viability of L-929, more cell activity was observed in the surface-treated experimental group than in the control group; for MG-63, the cell viability of the coated samples was similar to that of the uncoated samples. In the cell morphology analysis, both MG-63 and L-929 exhibited attached filopodia and lamellipodia, verifying that the cells were well attached. The alkaline phosphatase experiment demonstrated that the surface treatment did not affect the characteristics of early osteogenic differentiation, whereas RT-qPCR analysis showed that surface treatment can promote better performance of L-929 cells in collagen, type I, α1, and fibronectin 1. Finally, the results of the finite element analysis revealed that the coated TiNb interlayer can effectively reduce the stress concentration inside the layered coatings. Conclusions: TiNbZrTa series films deposited using cathodic arc evaporation had excellent biocompatibility with titanium alloys, particularly in regard to soft tissue cells, which exhibited an active performance. The finite element analysis verified that the TiNb interlayer can reduce the stress concentration inside TiNbZrTa series films, increasing their suitability for application in biomedical implants in the future.

Effect of Ta(Cu)–O composite film on mechanical properties, osteoblasts proliferation and antibacterial behavior of medical titanium alloy

The osteogenic, inflammatory and osteo-immunomodulatory performances of biomedical Ti-Ta metal-metal composite with Ca- and Si-containing bioceramic coatings

A nano-structured TiO<sub>2</sub>/CuO/Cu<sub>2</sub>O coating on Ti-Cu alloy with dual function of antibacterial ability and osteogenic activity

Microstructure, Wettability, Corrosion Resistance and Antibacterial Property of Cu-MTa2O5 Multilayer Composite Coatings with Different Cu Incorporation Contents

Biocompatibility, corrosion resistance and antibacterial activity of TiO2/CuO coating on titanium

Microstructure, Wettability, Corrosion Resistance and Antibacterial Property of Cu-MTa<sub>2</sub>O<sub>5</sub> Multilayer Composite Coatings with Different Cu Incorporation Contents

MOF-derived CuO@ZnO Modified Titanium Implant for Synergistic Antibacterial Ability, Osteogenesis and Angiogenesis.

Effects of Surface Roughening on Antibacterial and Osteogenic Properties of Ti-Cu Alloys with Different Cu Contents

Osteoblast Response to Copper-Doped Microporous Coatings on Titanium for Improved Bone Integration

Antibacterial activity, corrosion resistance and wear behavior of spark plasma sintered Ta-5Cu alloy for biomedical applications

Enhanced antibacterial and osteogenic properties of titanium by sputtering a nanostructured fluoride-doped tantalum oxide coating

Molecular mechanisms of osteogenesis and antibacterial activity of Cu-bearing Ti alloy in a bone defect model with infection in vivo

The Preparation and Properties of Multilayer Cu-MTa 2 O 5 Composite Coatings on Ti6Al4V for Biomedical Applications.

In vitro study on cytocompatibility and osteogenesis ability of Ti–Cu alloy

Biocompatibility and Microstructure-Based Stress Analyses of TiNbZrTa Composite Films

The Preparation and Properties of Multilayer Cu-MTa2O5 Composite Coatings on Ti6Al4V for Biomedical Applications

Surface Modification of Titanium Substrates for Enhanced Osteogenetic and Antibacterial Properties

A heterogeneous TiO2/SrTiO3 coating on titanium alloy with excellent photocatalytic antibacterial, osteogenesis and tribocorrosion properties

Characteristics of novel Ti-40Nb-xCu alloy and surface treatment with superior antibacterial property and biocompatibility using micro-arc oxidation for dental implants

Antibacterial and Osteogenic Activity of a Multifunctional Microporous Coating Codoped with Mg, Cu and F on Titanium.

Antibacterial and osteogenic thin films on Ti-6Al-4V surface formed by passivation process in copper hydroxide solution