Abstract:With the considerable growth of the world's elderly population, there is an urgent need to develop bone implants with multifunctional surfaces, including high wear/corrosion resistance, favorable biocompatibility and excellent self-sterilization characteristics. Here, a Ag2O/SiO2/Ta2O5 nanocomposite coating was deposited on a Ti–6Al–4V substrate by double-cathode glow discharge technology. The mechanical characteristics, microstructure, biological corrosion resistance, biocompatibility, visible light catalytic activity and antibacterial properties of the nanocomposite coating were comprehensively evaluated. The Ag2O/SiO2/Ta2O5 coating was composed of crystalline Ta2O5 and Ag2O particles embedded in amorphous SiO2, and showed significantly improved surface hardness relative to the substrate. Further, this coating significantly reduced the corrosion damage from Ringer's solution to the substrate and was conducive to the spreading, adhesion and proliferation of MC3T3-E1 cells. Through investigation of the coating's photocatalytic activity, it was found that the nanocomposite coating solved the limitation that commercial Ta2O5 could not be induced by visible light. Further DFT calculations revealed the orbital occupation of the density of states of the Ag2O/SiO2/Ta2O5 heterojunction and the transfer path of the photogenerated electron-hole pairs. This finding was validated by investigation of antibacterial behaviour under the conditions of dark and visible light. It was shown that the antibacterial rate for the Ag2O/SiO2/Ta2O5 nanocomposite coating against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) under visible-light is close to 100%, which is higher than the single antibacterial rate for Ag+ ions under dark conditions. Thus, the multifunctional Ag2O/SiO2/Ta2O5 nanocomposite coating is expected to become an attractive alternative for the surface modification of the next generation of bone implants.

A heterogeneous TiO2/SrTiO3 coating on titanium alloy with excellent photocatalytic antibacterial, osteogenesis and tribocorrosion properties

Fabrication of a Ag2O/SiO2/Ta2O5 nanocomposite coating for orthopaedic applications: Anticorrosion, photocatalytical and antimicrobial activities

Biocompatibility, corrosion resistance and antibacterial activity of TiO2/CuO coating on titanium

A nano-structured TiO<sub>2</sub>/CuO/Cu<sub>2</sub>O coating on Ti-Cu alloy with dual function of antibacterial ability and osteogenic activity

Enhanced Performance of Osteoblasts by Silicon Incorporated Porous TiO2 Coating

MOF-derived CuO@ZnO Modified Titanium Implant for Synergistic Antibacterial Ability, Osteogenesis and Angiogenesis.

Surface functionalization of titanium with zinc/strontium-doped titanium dioxide microporous coating via microarc oxidation.

Preparation and antibacterial properties of ZnSr-doped micro-arc oxidation coatings on titanium

Preparation of Biocompatible Structural Gradient Coatings on Pure Titanium

Enhanced Uniformity, Corrosion Resistance and Biological Performance of Cu-incorporated TiO2 Coating Produced by Ultrasound-Auxiliary Micro-Arc Oxidation

Antibacterial Ability and Osteogenic Activity of Porous Sr/Ag-containing TiO2 Coatings.

Antibacterial property, angiogenic and osteogenic activity of Cu-incorporated TiO2 coating

Multifunction Sr, Co and F co-doped microporous coating on titanium of antibacterial, angiogenic and osteogenic activities

Bio-corrosion behavior, antibacterial property and interaction with osteoblast of laser in-situ fabricated Ti-Si-Cu coatings on Ti-6Al-4V alloy

Surface Modification of Titanium Substrates for Enhanced Osteogenetic and Antibacterial Properties

Antibacterial and Osteogenic Activity of a Multifunctional Microporous Coating Codoped with Mg, Cu and F on Titanium.

Combined application of silica particles and zirconium hydrogen phosphate coating to improve the friction resistance and osteogenic/anti-inflammatory properties of micro-arc oxidation-treated titanium

Polydopamine-based surface coating fabrication on titanium implant by combining a photothermal agent and TiO2 nanosheets for efficient photothermal antibacterial therapy and promoted osteogenic activity

Biological performance and tribocorrosion behavior of in-situ synthesized CuxO/TiO2 coatings

Construction of Multi-Layered Zn-modified TiO2 Coating by Ultrasound-Auxiliary Micro-Arc Oxidation: Microstructure and Biological Property.

SURFACE CHARACTERIZATION OF ZrO2/Zr COATING ON Ti6Al4V AND IN VITRO EVALUATION OF CORROSION BEHAVIOR AND BIOCOMPATIBILITY