Abstract:The occurrence of sulfur in coal direct liquefaction residue affects its further high quality and high value utilization. Electrochemical desulfurization is characterized by mild reaction conditions, simple operation, easy separation of sulfur conversion products and little influence on the properties of the liquefied residue. An anodic electrolytic oxidation desulphurization experiment was carried out on the liquefaction residue of the by-product of a coal-to-liquid enterprise in the slurry state. An electrochemical test and material characterization of raw materials before and after electrolysis showed that electrolytic oxidation can desulfurize the liquefaction residue under an alkaline condition. Linear sweep voltammetry (LSV) was used for the electrolysis experiments to obtain the optimal slurry concentration of 60 g/L. On this basis, the reaction kinetics were calculated, and the minimum activation energy in the interval at 0.9 (V vs. Hg/HgO) was 19.71 kJ/mol. The relationship between the electrolytic desulfurization of the liquefied residue and energy consumption was studied by the potentiostatic method. The influence of anodic potential and electrolytic temperature on the current density, cell voltage, desulfurization rate and energy consumption was investigated. The experimental results showed that the desulfurization rate and total energy consumption increase positively with the increase in reaction temperature and electrolytic potential in a certain range. The influence of the reaction temperature on the desulfurization rate and total energy consumption is more prominent than that of electrolytic potential, but the energy consumption of sulfur removal per unit mass does not show a positive correlation. Therefore, with the energy consumption per unit mass of sulfur removal as the efficiency index, the optimal experimental results were obtained: under the conditions of 0.8 (V vs. Hg/HgO) anode potential, 50 °C electrolytic temperature, 60 g/L slurry concentration and 14,400 s electrolytic time, the desulfurization rate was 18.85%, and the power consumption per unit mass of sulfur removal was 5585.74 W·s/g. The results of XPS, SEM, BET and IC showed that both inorganic and organic sulfur were removed by electrolytic oxidation, and the morphology, pore structure and chemical bond of the liquefied residue were affected by electrolytic oxidation. The research method provides a new idea and reference for the efficiency evaluation of desulfurization and hydrogen production from coal liquefaction residue.

Use of La-Co@NPC for Sulfite Oxidation and Arsenic Detoxification Removal for High-Quality Sulfur Resources Recovery in Desulfurization Process

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

A Semi-Wet Technological Process for Flue Gas Desulfurization by Corona Discharges at an Industrial Scale

Co0 anchored on Co/N co-doped porous carbon material inducing H migration to accelerate sulfite oxidation and Hg(II) adsorption in flue gas desulfurization

Novel Method for High-Performance Simultaneous Removal of NOx and SO2 by Coupling Yellow Phosphorus Emulsion with Red Mud

Experimental Study on Electrochemical Desulfurization of Coal Liquefaction Residue

Selenium uptake and simultaneous catalysis of sulfite oxidation in ammonia-based desulfurization

Construction of Confined Bifunctional 2D Material for Efficient Sulfur Resource Recovery and Hg2+ Adsorption in Desulfurization

Construction of Confined Bifunctional 2D Material for Efficient Sulfur Resource Recovery and Hg 2+ Adsorption in Desulfurization

Innovative methodology for comprehensive utilization of arsenic-bearing neutralization sludge

Multi-roles of SO 2 to enhance the removal of arsenic from wastewater in sulfidation processes

Reaction Intermediates and Products Characterisation of NH3 in Desulphurisation with Activated Coke

Co-treatment of copper smelting flue dust and arsenic sulfide residue by a pyrometallurgical approach for simultaneous removal and recovery of arsenic

An improved Wellman-Lord process for simultaneously recovering SO2 and removing NOX from non-ferrous metal smelting flue gas

Studies on the Combined Technology of Chemical Precipitation and Electrocatalytic Oxidation for the Pretreatment of Desulfurization Wastewater

A new desulfation process of spent lead paste via cyclic utilization of CO2–NH3·H2O

A potential industrial waste-waste co-treatment process of utilizing waste SO2 gas and residue heat to recover Co, Ni, and Cu from copper smelting slag

Sulfur Removal at High Temperature During Coal Combustion in Furnaces: A Review

A Study of High Temperature Desulfurization and Regeneration Using Iron-Calcium Oxides in a Fixed-Bed Reactor

High Performance of Commercial PAC on the Simultaneous Desulfurization and Denitrification of Wastewater From a Coal-Fired Heating Plant

Resource utilization of semi-dry flue gas desulfurization ash by thermal treatment on sintering machine