Abstract:In order to avoid the discharge of deplating wastewater with high concentration of NO3−, an environmental friendly process, consisting of precipitation, electrodeposition and oxidation, is developed in this research for the treatment of real high acidic deplating wastewater containing Ag+, Cu2+, NO3− and chemical oxygen demand (COD). The wastewater is treated by precipitation to remove Ag+, electrodeposition to remove Cu2+, oxidation to reduce COD successively and then reused for deplating plastic plated parts. In precipitation process, 99.9% Ag+ in wastewater is precipitated by HCl and silver metal is then recovered through the replacement of AgCl by iron powder. Because of the high conductivity, Cu2+ in wastewater is then separated and recovered as copper metal on cathode through electrodeposition. The effect of electrodeposition parameters including cathode material, current density, electrode distance, reaction temperature and Cu2+ initial concentration is investigated. Up to 89.3% Cu2+ can be recovered in 80 min at the optimal condition. Finally, the COD is removed from 1360 mg L−1 to 378 mg L−1 in subsequent H2O2 oxidation process to ensure the reuse of water. Because the valuable Ag and Cu metals are recovered and the COD is removed, the wastewater can be reused as deplating solution. The estimated profit of this precipitation-electrodeposition-oxidation process reveals its practical feasibility. Furthermore, the process realizes the cleaner production of the deplating technology because it avoids the discharge of unmanageable wastewater with high NO3− concentration. More importantly, the process can also be improved to treat similar wastewater.

Studies on the Combined Technology of Chemical Precipitation and Electrocatalytic Oxidation for the Pretreatment of Desulfurization Wastewater

Study and optimization of catalytic oxidation technology in spent caustic desulfurization

Electrochemical Removal of Hydrogen Sulfide and Recovery of the Deposited Sulfur on the Anode from Wastewater

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

A Combined Electrocoagulation-Electrooxidation Treatment on Ctmp Wastewater

Experimental study of new desulfurizer for removal of H2S

The study on Chemi-thermomechanical pulp wastewater treatment using electro-fenton process

ELECTROCHEMICAL TREATMENT OF RECIRCULATING AQUACULTURE WASTEWATER USING A Ti/RuO2-IrO2 ANODE FOR SYNERGETIC TOTAL AMMONIA NITROGEN AND NITRITE REMOVAL AND DISINFECTION

Application of a Novel Strategy—advanced Fenton-chemical Precipitation to the Treatment of Strong Stability Chelated Heavy Metal Containing Wastewater

Pretreatment of a textile wastewater from alkali reduction,printing and dyeing operations

Efficient Treatment of High-Concentration Sulfurous Wastewater by Using Electrochemical Oxidation Process with Ti/SnO2–Sb Anode and Air Cathode

Waste coal cinder catalyst enhanced electrocatalytic oxidation and persulfate advanced oxidation for the degradation of sulfadiazine

Low-voltage Electrochemical Treatment to Precipitate Sulfide During Anaerobic Digestion of Beet Sugar Wastewater.

Combined Process of High-voltage Pulse Electrocoagulation and Refined Diatomite for Treatment of Electroplating Wastewater

Combined Process of Electrocatalysis Flocculation,MAP Precipitation,Cavitation Air Flotation,AMRCT and CASS for Pharmaceutical Wastewater Treatment

Treatment of real deplating wastewater through an environmental friendly precipitation-electrodeposition-oxidation process: Recovery of silver and copper and reuse of wastewater

Pretreatment of hypersaline and high-organic wastewater with a three-dimensional electrocatalytic system: a pilot-scale study

Simultaneous removal of chemical oxygen demand, turbidity and hardness from biologically treated citric acid wastewater by electrochemical oxidation for reuse

Sulfide removal and water recovery from ethylene plant spent caustic by suspension crystallization and its optimization via response surface methodology

Electroplating waste water treatment method

Experimental study on the treatment of high COD metal degreasing cleaning wastewater by coagulation and two-stage Fenton oxidation