Abstract:Journal of Reinforced Plastics and Composites, Ahead of Print. Focusing on the energy absorption characteristics of ultra-high molecular weight polyethylene (UHMWPE) fiber laminated panels, this study conducts ballistic tests and numerical simulations using 6 mm spherical projectiles to impact the UHMWPE laminated panels. The residual velocity characteristics, energy absorption patterns, and failure modes of the UHMWPE laminated panels under steel ball impacts were analyzed. The results show that the residual velocity of the steel ball increases with the increase of the incident velocity. In the velocity range near the ballistic limit velocity, the residual velocity of the steel ball increases sharply. When the incident velocity exceeds 340 m/s, the increase in residual velocity gradually slows down, tending towards a straight line. When the steel ball velocity is less than 330 m/s, the energy absorption of the UHMWPE laminated panels exhibits linear growth with increasing velocity, with a maximum energy absorption of 47.3 J. In the 327–340 m/s velocity range, the energy absorption of the laminated panels drops sharply from 47 J to around 30 J. In the 340 m/s–600 m/s velocity range, the decline in energy absorption gradually becomes more moderate, decreasing to around 20 J. Beyond 500 m/s, the energy absorbed by the UHMWPE laminated panels stabilizes with increasing velocity, and the fiber tensile failure is the main form of energy absorption of UHMWPE composite laminates under ballistic impact. The failure process of UHMWPE laminated panels presents a multi-stage failure mode, including fiber shear failure, tensile failure, and delamination. As the projectile's incident velocity increases, the damage mechanism of the UHMWPE laminated panels transitions from tensile-dominated to shear plugging-dominated. Through similarity theory analysis, under certain conditions, the ballistic limit velocity and the dimensionless parameter of unit energy absorption for the UHMWPE laminated panels satisfy geometric similarity.

Response characteristics and impact resistance of composite laminates with shear stiffening gel under hypervelocity impact

Soft Impact Response of Laminated Glass Plates

Deformation and Damage Mechanisms of Laminated Glass Windows Subjected to High Velocity Soft Impact

Investigation of the Ballistic Performance of GFRP Laminate under 150 m/s High-Velocity Impact: Simulation and Experiment

Effect of fiber architecture on the impact resistance of composite panels subjected to metallic projectile

Influence of Various Damage Mechanisms on the Low‐velocity Impact Response of Composite Laminates

Experimental and Numerical Study of Low-Velocity Impact Damage in Sandwich Panel with UHMWPE Composite Facings

Insights into the high-velocity impact behaviour of bio-inspired composite laminates with helicoidal lay-ups

Low Velocity Impact Response of Carbon Fiber Composite Laminates with Surface Glass Fibers

Research on Low-Velocity Impact Response of Novel Short-Fiber-Reinforced Composite Laminates

An experimental study of the dynamic responses of carbon fiber reinforced polymer composite laminates subjected to ice impact

The penetration resistance behavior and corresponding size effects of ultra-high molecular weight polyethylene composite laminates

The response of glass fibre reinforced PEKK laminates subjected to single and multiple impact loading

Dynamic Response of Sandwich Plates with GLARE Face-Sheets and Honeycomb Core under Metal Foam Projectile Impact: Experimental and Numerical Investigations

An experimental investigation of penetration failure modes in composite laminates

Impact response of thermoplastic composites – Experiments and modeling

Analysis on the impact response of fiber-reinforced composite laminates: an emphasis on the FEM simulation

Experimental and Simulation Study on Failure of Thermoplastic Carbon Fiber Composite Laminates under Low-Velocity Impact

Soft impact of GLARE fiber metal laminates

Experimental and numerical response and failure of laterally impacted carbon/glass fibre-reinforced hybrid composite laminates

Insight into wave propagation in polyimide films and resistive grid sandwich structures towards a hybrid monitoring of hypervelocity impact