Abstract:Abstract The working condition of the rail transit components such as bogies is complicated, so the high comprehensive performance of composite parts is desperately required. However, existing pure three‐dimensional braided or laminated composites have been unable to satisfy the cooperative demand of in‐plane and interlaminar properties. In this paper, a novel design of three‐dimensional braided/unidirectional (3D/UD) hybrid composite is proposed to balance the in‐plane (tensile, compression, bending), interlaminar (interlaminar shear, low‐speed impact) properties of the composite. The effects of different 3D/UD mixing ratio and layup sequence on the mechanical properties and damage mechanism of hybrid composites were studied by the parametric analysis of the experimental test results, and the comprehensive mechanical properties of the hybrid structure were optimized by COPRAS evaluation method. The results show that the larger the proportion of unidirectional layer, the better the mechanical property in‐plane, but the worse interlayer property. In addition, the change of layup sequence induces a complex nonlinear relationship between 3D/UD mixing ratio and mechanical properties. Combined with microscopic failure characterization results, it is found that the sandwich structure and the addition of uniformly distributed interfacial layer can improve the mechanical properties of the hybrid composite. The optimization results show that the sandwich structure hybrid composite UD 6 /3D/UD 6 with the best balance between in‐plane and interlaminar properties was selected by COPRAS. Compared with pure 3D composites, the comprehensive mechanical properties of UD 6 /3D/UD 6 are increased by 53.9%, which provides a reference for the structural design of hybrid composites in the future. Highlights A novel design of 3D/UD hybrid composite is proposed to balance the in‐plane and interlaminar properties. The influence regularity of 3D/UD mixing ratio and layup sequence on properties of hybrid composites were obtained. The mixing failure mechanism of interlayer and in‐plane was revealed. The optimal structure UD 6 /3D/UD 6 under complex working conditions was obtained by COPRAS.

A novel design of three‐dimensional/unidirectional hybrid composites to balance in‐plane and interlaminar mechanical properties

Fabrication and braiding angle effect on the improved interlaminar shear performances of 3D braided sandwich hybrid composites

Interaction of Multiple Micro-Defects on the Strength and Failure Mechanism of UD Composites by Computational Micromechanics

Short Beam Shear Behavior and Failure Characterization of Hybrid 3D Braided Composites Structure with X-ray Micro-Computed Tomography

Improving Bending and Interlayer Properties of Hybrid-Fiber-reinforced Composites Through Functionally Graded Hybrid Strategy by 3D-Printing Manufacturing Process

Layout design and mechanical behavior of 3D printed intralayer hybrid continuous carbon/glass fiber composites

Mechanical Performance of Hybrid Bismaleimide Composites Reinforced with Three-Dimensional Braided Carbon and Kevlar Fabrics

Preparation and Characterization of Three-Dimensional Braided Carbon/Kevlar/Epoxy Hybrid Composites

Mechanical properties of all-C/C composite hybrid bonded/bolted joints

Advances in Multiscale Modeling and Mechanical Properties Characterization of 3D‐Braided Composites

Investigation on the mechanical properties of 3D printed hybrid continuous fiber-filled composite considering influence of interfaces

Novel processing technology and mesoscopic geometric modeling of a new three-dimensional (3D) braided composite and the study on its longitudinal mechanical properties

A detailed experimental parametric analysis of bolted and hybrid bolted/bonded composite joints

Mechanical Characterization of Hybrid Steel Wire Mesh/Basalt/Epoxy Fiber-Reinforced Polymer Composite Laminates

Experimental and Numerical Investigation of the Mechanical Properties of 3D-Printed Hybrid and Non-Hybrid Composites

Hybrid effect of 3D-printed coaxial continuous hybrid fibre-reinforced composites

Experimental Characterization of Internal Structure and Physical Properties of Unidirectional Ply‐Level Hybrid Carbon Composite Material

Balance Interlaminar Improvement and In-Plane Adverse Impact of Hexagonal Semi-Embedded Fine Z-pin Reinforced Polymer Composite

A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites

Characterization of three-dimensional braided carbon/Kevlar hybrid composites for orthopedic usage

Assessment of 3D woven near‐net‐shaped I‐sections for aeronautical applications: Weave design, manufacture, and mechanical properties under multiple loading conditions