Abstract:Composite mechanical joints are extensively used and becoming crucial components for primary and secondary structures in industry. Considerable efforts have been contributed to the failure behavior of resin matrix laminate composite bolt joint, but few ones refer to carbon matrix woven composites. In current work, a comprehensive experimental and numerical research on the failure behavior for satin woven carbon/carbon composites under pin-loading, which is the typical loading case for mechanical joint, was presented. Seven types of specimens with different configuration were tested to evaluate the influence of the geometry on the failure modes. The testing results stated that, with the increasing of width-to-hole diameter ratio (W/D) and edge distance-to-hole diameter ratio (E/D), the net tension and shear out failure transformed into the bearing failure respectively, while hole diameter-to-thickness ratio (D/t) hardly affect the failure mode. For a further exploration for damage mechanism of the acceptable bearing failure in engineering, damage accumulation and evolution were assessed combining numerical simulation and acoustic emission monitoring. In view of the complexity of satin woven framework, the hierarchical multiscale numerical strategy from micro-to macro-level was proposed to obtain the material mechanical performance. In order to acquire reliable prediction and consider the effects of the uncertainty sources on composite properties, the model geometry reconstruction was performed using X-ray tomography. Meanwhile, the fiber and void random distributions were determined via the Random Sequential Adsorption algorithm. The Murakami-Ohno damage theory was adopted to characterize the damage propagation. It is concluded that, the numerical prediction agreed with the testing results reasonably well, and the main damage mechanism during the bearing failure included matrix cracking, yarns pulling-out and yarns fracture matching various amplitude ranges of acoustic emission signals.

Assessment of 3D woven near‐net‐shaped I‐sections for aeronautical applications: Weave design, manufacture, and mechanical properties under multiple loading conditions

Progressive failure analysis of 2D woven composites at the meso-micro scale

Mechanical Testing of 3D Fabric Composites and Their Matrix Material SC-15

Quasi-static mechanical behavior of 2.5D woven variable thickness composites

Influence of Fibre Architecture on Impact Damage Tolerance in 3D Woven Composites

A Comparative Study on Interlaminar Properties of L-shaped Two-Dimensional (2D) and Three-Dimensional (3D) Woven Composites

Mechanical performance of composites based on various three-dimensional woven-fibre preforms

Bending fatigue performance of three‐dimensional woven composites—A review

An experimental investigation on the influence of weave architectures on out-of-plane and in-plane impact properties of 3D woven fabric-reinforced composites

Experimental and numerical validation of high strain rate impact response and progressive damage of 3D orthogonal woven composites

Experimental Investigation on Low-Velocity Impact Performance of 3D Woven Textile Composites

Effect of Crossing Warp Arrangements on Delamination Resistance of 3D Woven Composite T-joints under In-plane Tensile Loading

Experimental investigation on the effects of fabric architectures on mechanical and damage behaviors of carbon/epoxy woven composites

Axial-compression performance and finite element analysis of special-shaped tubular three-dimensional woven composites with different thicknesses and shapes

Fabrication and braiding angle effect on the improved interlaminar shear performances of 3D braided sandwich hybrid composites

Impact Performance of 3D Orthogonal Woven Composites: A Finite Element Study on Structural Parameters

Progressive damage analysis of double-layer variable thickness 3D woven composite scaled engine casing

Multi‐layer structure design, fabrication and numerical simulations of 3D woven spacer fabric composites with improved mechanical properties

High-fidelity modeling of 3D woven composites considering inhomogeneous intra-yarn fiber volume fractions

Experimental and Multiscale Numerical Investigation on Failure Behavior of Satin Woven Carbon/carbon Composites Subjected to Pin-Loading

Experimental investigation on response and failure modes of 2D and 3D woven composites under low velocity impact