Abstract:The incorporation of Mg and B in cobalt‐free LiNiO2 cathodes boosts the structural integrity of the cathode, resulting in larger active lithium utilization along with a robustly passivated cathode‐electrolyte interface. This in turn allows for reduced transition‐metal dissolution and chemical crossover, inhibiting catalyzed reactions that can detrimentally passivate the graphite anode and holistically leading to better cyclability. High‐nickel layered oxide cathodes, such as LiNi1‐x‐yMnxCoyO2 (NMC) and LiNi1‐x‐yCoxAlyO2 (NCA), are at the forefront for implementation in high‐energy‐density lithium‐ion batteries. The presence of cobalt in both cathode chemistries, however, largely deters their application due to fiscal and humanitarian issues affiliated with cobalt sourcing. Increasing the Ni content drives down the Co content, but introduces additional structural and electrochemical problems attributed to high‐Ni cathodes. Herein a dually modified cobalt‐free ultrahigh‐nickel cathode 0.02B‐LiNi0.99Mg0.01O2 (NBM) is presented with 1 mol% Mg and 2 mol% B that exhibits a high initial 1C discharge capacity of 210 mA h g−1 with a 20% capacity retention improvement over 500 cycles when benchmarked against LiNiO2 (LNO) in pouch full cell configurations with graphite anode. Postmortem analyses reveal the enhanced performance stems from reduced active lithium inventory loss and localized surface reactivity in the NBM cathode. The stabilized cathode‐electrolyte interphase subsequently reduces transition‐metal dissolution and ensuing chemical crossover to the graphite anode, which prevents further catalyzed parasitic reactions that harmfully passivate the anode surface. Altogether, this study aims to highlight the importance of electrode characterization and analysis from an interphasial viewpoint and to push the ongoing research to stabilize cobalt‐free ultrahigh‐Ni cathodes for industrial feasibility.

Electrolyte‐Enabled High‐Voltage Operation of a Low‐Nickel, Low‐Cobalt Layered Oxide Cathode for High Energy Density Lithium‐Ion Batteries

Ordered LiNi0.5Mn1.5O4 Cathode in Bis(fluorosulfonyl)imide-Based Ionic Liquid Electrolyte: Importance of the Cathode-Electrolyte Interphase

Enhancing high-voltage performances of nickel-based cathode material via aluminum and progressive concentration gradient modification

Radially Oriented Single‐Crystal Primary Nanosheets Enable Ultrahigh Rate and Cycling Properties of LiNi0.8Co0.1Mn0.1O2 Cathode Material for Lithium‐Ion Batteries

A High Energy‐Density, Cobalt‐Free, Low‐Nickel LiNi0.7Mn0.25Al0.05O2 Cathode with a High‐Voltage Electrolyte for Lithium‐Metal Batteries

Stable Cycling of High-Voltage Lithium-Metal Batteries Enabled by High-Concentration FEC-Based Electrolyte

Ethylene Carbonate‐Free Electrolytes for High‐Nickel Layered Oxide Cathodes in Lithium‐Ion Batteries

Tailoring electrolyte enables high-voltage Ni-rich NCM cathode against aggressive cathode chemistries for Li-ion batteries

High Voltage Operation of Ni‐Rich NMC Cathodes Enabled by Stable Electrode/Electrolyte Interphases

Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries

Concentrated Ternary Ether Electrolyte Allows for Stable Cycling of a Lithium Metal Battery with Commercial Mass Loading High‐nickel NMC and Thin Anodes

High-Efficiency Electrolyte for Li-Rich Cathode Materials Achieving Enhanced Cycle Stability and Suppressed Voltage Fading Capable of Practical Applications on a Li-Ion Battery

Enabling stable and high-rate cycling of a Ni-rich layered oxide cathode for lithium-ion batteries by modification with an artificial Li<SUP>+</SUP>-conducting cathode-electrolyte interphase

Weakly solvated EC-free linear alkyl carbonate electrolytes for Ni-rich cathode in rechargeable lithium battery

Improving LiNixCoyMn1−x−yO2 Cathode Electrolyte Interface under High Voltage in Lithium Ion Batteries

Improving Cycling Stability of Ni‐Rich Cathode for Lithium‐Metal Batteries via Interphases Tunning

Dual-anion ionic liquid electrolyte enables stable Ni-rich cathodes in lithium-metal batteries

Stabilizing the Interphase in Cobalt‐Free, Ultrahigh‐Nickel Cathodes for Lithium‐Ion Batteries

An Additive-Enabled Ether-Based Electrolyte to Realize Stable Cycling of High-Voltage Anode-Free Lithium Metal Batteries

Localized High‐Concentration Electrolytes with Low‐Cost Diluents Compatible with Both Cobalt‐Free LiNiO2 Cathode and Lithium‐Metal Anode