Abstract:Recent theoretical developments revealed that reinforced concrete (RC) structures are susceptible to deterioration risk upon exposure to high temperatures where the mechanical properties of their constituents are affected and therefore require upgrading their overall performance. However, the overall behavior could be improved by strengthing the RC beams using the well-known carbon fiber-reinforcement polymers (CFRP) materials where its efficiency is highly limited by detachment, and debonding problems appear as a result of the weakness in the bond between the concrete surface and the strengthening material or upon the stress concentration induced by the various anchoring systems. The CFRP sheets have been integrated as internal reinforcement in the maximum bending zone within the thermally damaged beams, a new technology used in this study. The suggested method was the first of its kind and did not need an adhesive to be applied where debonding problem is eliminated. In contrast to conventionally reinforced steel, CFRP composite materials are fully compatible with flexural steel and constrained concrete. A total of 40 RC with (150 × 200) mm2 and an overall length of 1100 mm concrete beams were cast, and the studied parameters were the CFRP length, position, and exposure temperature. The internal strengthening technique has been found to ensure the full utilization of the strengthening material where the externally-strengthened beams fail preceding the CFRP strain reached, and this was confirmed using the linear weighted sum method where the internal strengthening has the highest ranking based on the mechanical characteristics comparisons. Moreover, the internal CFRP reinforcement improves RC beam performance, strength, stiffness, toughness, and serviceability more than exterior CFRP sheets. However, the enhancement percentages are twice as much for internal strengthening as the external one. It has also been found that the reinforcement's location substantially impacted the number and length of flexural cracks and its failure mode. In addition, for every 1% reduction in concrete compressive strength in heat damage, the average ultimate load was reduced by 0.8%. The CFRP profitability indexes decrease as sheet number and temperature increase; the average toughness decrease at 150 °C, 250 °C, and 500 °C is 12%, 21%, and 47%, respectively.

Residual Flexural Capacity Prediction in Heat-Affected Concrete Members through Ground Penetrating Radar and Thermal Imaging

Analysis of the Dynamic Response in Blast-Loaded CFRP-Strengthened Metallic Beams

Optimizing Building Rehabilitation through Nondestructive Evaluation of Fire-Damaged Steel-Fiber-Reinforced Concrete

Multiscale Prediction of Thermal Damage for Hybrid Fibers Reinforced Cementitious Composites Blended with Fly Ash at High Temperatures

Investigation of Fire Effects on Reinforced Concrete Members via Finite Element Analysis.

INVESTIGATING FIRE-INDUCED DAMAGE ON FIBER-REINFORCED CONCRETE SAMPLES USING NONDESTRUCTIVE EVALUATION METHODS

Infrared Thermal Image Method and Ultrasonic Rebound Method in Assessing Fire-Damaged Concrete

Flexural and shear strengthening of RC beams reinforced with externally bonded CFRP laminates postfire exposure by experimental and analytical investigations

Finite Element Analysis and Calculation Method of Residual Flexural Capacity of Post-fire RC Beams

Applications of Machine Learning to Predict the Flexural Bearing Capacity of Hollow Core Slabs After Fire Exposure

Impact of Internal CFRP strips on the flexural behavior of heat-damaged reinforced concrete beams

Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel

Residual Shear Capacity of Post-Fire RC Beams under Indirect Loading

Nondestructive Evaluation of Postfire Full-Scale Reinforced Concrete Frames: Field Tests

Study on the Prediction of Residual Life of Concrete Rectangular Beams after Fire

Damage Detection in FRP-Reinforced Concrete Elements

Experimental and Numerical Study on the Behavior of Reinforced Concrete Deep Beams with Normal-Strength and High-Strength Concrete After Being Exposed to Fire

Postfire performance of pultruded wood-cored GFRP sandwich beams

Detection of Destructive Processes and Assessment of Deformations in PP-Modified Concrete in an Air-Dry State and Exposed to Fire Temperatures Using the Acoustic Emission Method, Numerical Analysis and Digital Image Correlation

Insights and theoretical model of thermal conductivity of thermally damaged hybrid steel-fine polypropylene fiber-reinforced concrete

Investigation of Residual Strength of GFRP Bar Reinforced Concrete Beams with Recycled Materials Under Elevated Temperature