Abstract:The cross-shaped stiffened concrete-filled steel tubular stub column is constructed by incorporating steel reinforcement ribs into the traditional cross-shaped design, which helps delay the buckling of the steel tube and enhances its restraining effect on the concrete. However, existing standards and research proposed design methods for estimating the post-fire bearing capacity of steel reinforced concrete stub columns are primarily applicable to the ordinary steel tubes with conventional thickness and sections. Therefore, it is necessary to investigate the axial compressive properties of high-strength concrete stub columns with irregular thin-walled steel tubes after exposure to fire, which can contribute to their potential future application. Effects of various experimental parameters, such as heating time, width-thickness ratio, and longitudinal spacing of stiffeners were investigated. In total one specimen subjected to ambient temperature and eight cross-shaped stiffened concrete-filled steel tubular stub columns subjected to fire conditions were prepared for measuring temperature-time curves of specimens during ISO-834 standard fire, load-displacement curves, load-transverse, and longitudinal strain curves of specimens under axial compression loading. The failure modes of the specimens were recorded, and the influence of each parameter on the post-fire mechanical properties of the specimens was analyzed based on the experimental results. ABAQUS software was utilized to develop a model for post-fire analysis, which was validated by comparing it with experimental data. After validation, the model was used to analyze the underlying mechanism, and a comprehensive parametric study of members was conducted. Based on the results of the parametric study and the model developed for calculating bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column at ambient temperature, a simplified equation accounting for the effects of elevated temperature was proposed to predict the residual bearing capacity of the cross-shaped stiffened concrete-filled steel tube stub column after fire exposure. The average error between the simplified formula and the finite element simulation results is 0.925, and the mean square error is 0.085.

Applications of Machine Learning to Predict the Flexural Bearing Capacity of Hollow Core Slabs After Fire Exposure

Study on Residual Flexural Performance of Precast Prestressed Hollow Core Slabs After Exposure to Fire

Evaluation and Reinforcement of Prestressed Concrete Hollow Slab Bridge after Fire Damage

Prediction of mechanical behavior of reinforced concrete bridges following a fire based on the fire dynamics simulator–kriging model

Simulation Analysis and Evaluation of Prestressed Concrete Hollow Slab Girder Subjected to Fire Disaster

Behavior of Cross-Shaped Stiffened Concrete-Filled Steel Tubular Stub Columns after Fire Exposure

Postfire Performance of Prestressed Concrete Hollow-Core Floor Systems with Edge Beams

Mechanical Properties of Full-Scale Prestressed Concrete Beams with Thin Slab after Exposure to Actual Fire

Analytical Model for Predicting the Load–deflection Curve of Post-Fire Reinforced-Concrete Slab

Flexural performance tests and machine learning analysis of prestressed high strength steel reinforced concrete beams

Experimental Study on Residual Bearing Capacity of Full-Size Fire-Damaged Prestressed Concrete Girders

Study on Detection, Evaluation and Reinforcement Technology on Fire Damaged PC Hollow Beam

Experimental studies and theoretical analysis of the residual properties of three-span small-scale continuous concrete slabs after a fire

Full-range Experimental Analysis of Flexural Performance of an Existing PC Hollow Slab

Experimental and Numerical Investigation on Reinforced-Concrete Slab-Beam Assemblies Exposed to Extended and Travelling Fires

Deep learning-based prediction of structural responses of RC slabs subjected to blast loading

Experimental and Numerical Study of the Flexural Performance of Spontaneous Combustion Gangue Coarse Aggregate Concrete Laminated Slab

Machine Learning-Aided Prediction of Post-Fire Shear Resistance Reduction of Q690 HSS Plate Girders

Transverse Connectivity and Durability Evaluation of Hollow Slab Bridges Using Surface Damage and Neural Networks: Field Test Investigation

Residual Flexural Capacity Prediction in Heat-Affected Concrete Members through Ground Penetrating Radar and Thermal Imaging

Post-fire Behaviour of Continuous Reinforced Concrete Slabs under Different Fire Conditions