Abstract:Purpose Additive manufacturing (AM) can achieve significant weight savings with only minor compromises in strength if high-performance wrought aluminum alloys are used as feedstock. Despite the advantages in strength that aluminum alloys (AA) 6061 offer, they cannot be manufactured via printing because of hot cracking and other solidification problems. The purpose of this study is to achieve high-quality printing of AA6061 with nanotreated wires. Design/methodology/approach Nanotreating was used to modify the AA6061 alloy composition by adding a small fraction of nanoparticles to enhance the alloy's manufacturability and resultant properties. Wire arc additive manufacturing (WAAM) was used to print the nanotreated AA6061 wire feedstock. The microstructure of the printed AA6061 was characterized by X-ray crystallography, optical microscopy, scanning electron microscopy and energy dispersive spectroscopy mapping. The microhardness profile, tensile behavior and fracture surface were analyzed. Findings This work successfully used WAAM to print nanotreated AA 6061 components. The resulting AA6061 parts were crack-free, with exceptional grain morphology and superior mechanical properties. Owing to the excellent size control capabilities of nanoparticles, a homogeneous distribution of small grains was maintained in all deposited layers, even during repeated thermal cycles. Originality/value Previous studies have not successfully printed AA6061 using WAAM. Conventional WAAM products exhibit anisotropic mechanical properties. The nanotreated AA6061 was successfully printed to achieve homogeneous microhardness and isotropic tensile properties. The promising results of this study reflect the great potential of nanotech metallurgy as applied to the WAAM process.

Experimental investigations on corrosion behavior and antibacterial property of nickel-aluminum bronze fabricated through wire-arc additive manufacturing (WAAM)

Experimental investigation on wear resistance and corrosion behavior of nickel-aluminum bronze alloy fabricated by wire-arc additive manufacturing

Enhanced mechanical properties in nickel-aluminium bronze alloy via wire arc additive manufacturing with follow-weld forced cooling

Effects of Location on the Microstructure and Mechanical Properties of Cu-8Al-2Ni-2Fe-2Mn Alloy Produced Through Wire Arc Additive Manufacturing

Perspectives on the unusual electrochemical corrosion of Nickel Aluminum Bronze (NAB) alloy fabricated through laser-powder bed fusion additive manufacturing

Effect of grain refinement induced by wire and arc additive manufacture (WAAM) on the corrosion behaviors of AZ31 magnesium alloy in NaCl solution

High Corrosion Resistance Nickel-Aluminum Bronze Prepared by Additive Manufacturing Followed by Laser Treatment

Microstructure, Mechanical and Corrosion Properties of Copper-Nickel 90/10 Alloy Produced by CMT-WAAM Method

Tailoring microstructure of a nickel aluminium bronze by hot extrusion and its impact on mechanical and corrosion behaviour

Investigation of mechanical and corrosion behavior of multi-pass nickel-aluminum bronze fabricated through wire-arc directed energy deposition

Improved strength in nickel‐aluminum bronze/steel bimetallic component fabricated using arcing-wire arc additive manufacturing with alternating deposition strategy

Advanced mechanical properties of nickel‐aluminum bronze/steel composite structure prepared by wire‐arc additive manufacturing

Inhomogeneity and anisotropy of Al-Zn-Mg-Cu alloy manufactured by wire arc additive manufacturing: microstructure, mechanical properties, stress corrosion cracking susceptibility

Corrosion of nickel-based alloys fabricated through additive manufacturing: a review

Electrochemical insight into the passivity and corrosion of 316 L stainless steel fabricated through wire arc additive manufacturing

Wire arc additive manufacturing (WAAM) of nanotreated aluminum alloy 6061

Wire arc additive manufacturing of Al-Zn-Mg-Cu alloy: Microstructures and mechanical properties

Microstructure, Mechanical and Tribological Properties of Nickel-Aluminium Bronze Alloys Developed Via Gas-Atomization and Spark Plasma Sintering

Stress corrosion behavior and microstructure analysis of Al-Zn-Mg-Cu alloys fabricated by CMT wire arc additive manufacturing with different post-treatments

Effect of Al/Ni Ratio on the Microstructure and Properties of Nickel-Aluminum Bronze Alloys

Comparative Study on Wire-Arc Additive Manufacturing and Conventional Casting of Al–Si Alloys: Porosity, Microstructure and Mechanical Property