Abstract:With the improvement of computational speed, thermal management becomes a serious concern in computer system. CPU chips are squeezing into tighter and tighter spaces with no more room for heat to escape. Total power-dissipation levels now reside about 110 W, and peak power densities are reaching 400–500 W/mm2 and are still steadily climbing. As a result, higher performance and greater reliability are extremely tough to attain. But since the standard conduction and forced-air convection techniques no longer be able to provide adequate cooling for sophisticated electronic systems, new solutions are being looked into liquid cooling, thermoelectric cooling, heat pipes, and vapor chambers. In this paper, we investigated a novel method to significantly lower the chip temperature using liquid metal with low melting point as the cooling fluid. The liquid gallium was particularly adopted to test the feasibility of this cooling approach, due to its low melting point at 29.7 °C, high thermal conductivity and heat capacity. A series of experiments with different flow rates and heat dissipation rates were performed. The cooling capacity and reliability of the liquid metal were compared with that of the water-cooling and very attractive results were obtained. Finally, a general criterion was introduced to evaluate the cooling performance difference between the liquid metal cooling and the water-cooling. The results indicate that the temperature of the computer chip can be significantly reduced with the increasing flow rate of liquid gallium, which suggests that an even higher power dissipation density can be achieved with a large flow of liquid gallium and large area of heat dissipation. The concept discussed in this paper is expected to provide a powerful cooling strategy for the notebook PC, desktop PC and large computer. It can also be extended to more wide area involved with thermal management on high heat generation rate.

Semiconductor cooling device

Micro-dielectric-droplet impingement cooling system based on MEMS

Advancing Cryogenic Electronic Cooling: A Case Study on Embedded Manifold Microchannels in Micromachined Joule-Thomson Coolers

Investigations on Coupling Between Performance and External Operational Conditions for a Semiconductor Refrigeration System

Electrically driven chip cooling device using hybrid coolants of liquid metal and aqueous solution

A semiconductor refrigerator

Performance Research of a Semiconductor Cooling Device with Solid Desiccant

Semiconductor cooling structure

Self-Driven Electronic Cooling Based on Thermosyphon Effect of Room Temperature Liquid Metal

Jet Microchannel with Sawtooth Wall for Efficient Cooling of High-Power Electronics

Design of Practical Liquid Metal Cooling Device for Heat Dissipation of High Performance Cpus

Heat-Driven Liquid Metal Cooling Device for the Thermal Management of A Computer Chip

Coolers Based on Semiconductor Refrigeration Technology for Electric Vehicle On-Board Chargers

A Novel VLSI Technology to Manufacture High-Density Thermoelectric Cooling Devices

Efficient Thermoelectric Cooler for Localized Cooling in Electronic Devices

Design of a Self-Driven Liquid Metal Cooling Device for Heat Dissipation of Hot Chips in a Closed Cabinet

Liquid Metal Based Miniaturized Chip-Cooling Device Driven by Electromagnetic Pump

A miniature atomization-air-cooled heat sink for electronic chips

Heat dissipation performance improvement of a solid-state fan using copper foams as collecting electrode

A Powerful Way of Cooling Computer Chip Using Liquid Metal with Low Melting Point As the Cooling Fluid

Performance Study of Portable Semiconductor Refrigeration Device Based on CFD Simulation