Abstract:Aspheric thin-walled crucibles with large diameters are widely used for photovoltaics and semiconductor industries, while they have hard-brittle and aspheric characteristics. Nevertheless, these crucibles strictly require atomic surfaces and high material removal rate (MRR). This is a challenge for chemical mechanical polishing (CMP). To break this challenge, a novel green CMP was developed for fused silica, containing ceria, lanthana, hydrogen peroxide, diethylene triaminepentaacetic acid pentasodium, carboxymethyl cellulose sodium and guanidine carbonate. After CMP, surface roughness Ra of 0.115 is obtained at a scanning area of 5 × 5 μm2 measured by atomic force microscopy, and MRR is 563 nm/min. In such an atomic surface, the MRR is the highest compared with those published previously. Transmission electron microscopy confirms that the thickness of damaged layer after CMP is only 2.63 nm. A novel approach of robot floating polishing is proposed for aspheric crucibles with a diameter of 810 mm and a height of 580 mm. Using the developed CMP, surface roughness Sa of 0.178 nm on inner surface of an aspheric thin-walled crucible is achieved under a measurement area of 50 × 50 μm2. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance reveal that the content of Ce3+ increased from 28.54 to 43.76 %. Through Raman, XPS and Fourier transform infrared spectroscopy, CMP mechanisms are elucidated. Densified damaged layer on the surface of fused silica was induced by the transformation of surface structure from six-membered to four- or three-membered network. Ce-OH and Si-OH were formed between fused silica and ceria abrasives, forming Ce-O-Si by condensation reaction of dehydration. The developed green CMP and approach provide new pathway to polish and manufacture atomic surfaces for aspheric thin-walled crucibles with large diameters.

Increasing the Efficiency of Finishing of Quartz Crystal Elements through Controlling the Structural, Mechanical, and Rheological Characteristics of Abrasive Suspensions

Nano-Precision Synergistic Finishing Process Integrated ELID-Grinding and MRF

Superfinishing Technology Test for Ceramic Cylindrical Rollers

Research on Chemical Mechanical Polishing Technology for Zirconium-Based Amorphous Alloys

Optimization of polishing fluid composition for single crystal silicon carbide by ultrasonic assisted chemical-mechanical polishing

Abrasive Jet Polishing Utilizing the Synergistic Effect of Ultrasonic Pulse-Cavitation and Process Optimization Research

Study on the development of CeO2 self-sharpening gel abrasive tools and grinding performance on quartz glass

Angstrom surface with high material removal rate for quartz glass induced by silk dissolved novel green chemical mechanical polishing

Methods and Mechanistic Analysis of Improving the Dispersion of Nano Silica Colloidal Particles in Chemical Mechanical Polishing Slurries

High-Efficiency Chemical-Mechanical Magnetorheological Finishing for Ultra-Smooth Single-Crystal Silicon

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

Trivalent lanthanum and ytterbium doped meso-silica/ceria abrasive systems toward chemical mechanical polishing (CMP) and ultraviolet irradiation-assisted photochemical mechanical polishing (PCMP)

Present Situation and Development of Quartz Crystals Processing

Optimizing of the Colloidal Dispersity of Silica Nanoparticle Slurries for Chemical Mechanical Polishing

Dispersion and Polishing Mechanism of a Novel CeO2-LaOF-Based Chemical Mechanical Polishing Slurry for Quartz Glass

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Enhanced machinability of aluminium-based silicon carbide by non-resonant vibration-assisted magnetorheological finishing

Improvement in dispersion stability of alumina suspensions and corresponding chemical mechanical polishing performance

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity