A Novel Soft‐Magnetic B2‐Based Multiprincipal‐Element Alloy with a Uniform Distribution of Coherent Body‐Centered‐Cubic Nanoprecipitates

Yue Ma,Qing Wang,Xuyang Zhou,Jiamiao Hao,Baptiste Gault,Qingyu Zhang,Chuang Dong,T. G. Nieh
DOI: https://doi.org/10.1002/adma.202006723
IF: 29.4
2021-03-03
Advanced Materials
Abstract:Multiprincipal-element alloys (MPEAs), including high-entropy alloys, are a new class of materials whose thermodynamical properties are mainly driven by configuration entropy, rather than enthalpy in the traditional alloys, especially at high temperatures. Herein, the design of a novel soft-magnetic nonequiatomic, quaternary MPEA is described, via tuning its chemical composition to deliberately manipulate its microstructure, such that it contains ultrafine ferromagnetic body-centered-cubic (BCC) coherent nanoprecipitates (3-7 nm) uniformly distributed in a B2-phase matrix. The new alloy Al<sub>1.5</sub> Co<sub>4</sub> Fe<sub>2</sub> Cr exhibits high saturation magnetization (M<sub>S</sub>  = 135.3 emu g<sup>-1</sup> ), low coercivity (H<sub>C</sub>  = 127.3 A m<sup>-1</sup> ), high Curie temperature (T<sub>C</sub>  = 1061 K), and high electrical resistivity (ρ  = 244 μΩ cm), promising for soft magnets. More importantly, these prominent soft-magnetic properties are observed to be retained even after the alloy is thermally exposed at 873 K for 555 h, apparently attributable to the excellent stability of the coherent microstructure. The versatility of the magnetic properties of this new alloy is discussed in light of the microstructural change induced by tuning the chemical composition, and the enhanced performance of the alloy is compared directly with that of the traditional soft-magnetic alloys. The perspective is also addressed to design high-performance soft-magnetic alloys for high-temperature applications.
materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
What problem does this paper attempt to address?
The problem that this paper attempts to solve is to develop a new type of multi - principal - element alloy (MPEA), which has excellent soft magnetic properties and can still maintain good performance at high temperatures. Specifically, the research objective is to design an alloy containing uniformly distributed body - centered cubic (BCC) nano - precipitates by adjusting the chemical composition. These nano - precipitates form a coherent structure in the B2 matrix, thereby achieving high saturation magnetization (\(M_S\)), low coercivity (\(H_C\)), high Curie temperature (\(T_C\)) and high resistivity (\(\rho\)). The solution of these problems is crucial for improving the application performance of soft magnetic materials in high - temperature environments, especially in the aviation and aerospace industries. The traditional soft magnetic materials mentioned in the paper, such as Finemet alloys and Hitperm series alloys, although they have good soft magnetic properties, their applications at high temperatures are limited because the amorphous matrix of these alloys is unstable, resulting in their service temperature not exceeding 573 K. In addition, although the saturation magnetization and Curie temperature of some alloys can be improved by partially replacing cobalt (Co) with iron (Fe), the resistivity of these alloys is still limited, which is not conducive to reducing eddy current losses. Therefore, this research aims to overcome the limitations of existing materials, especially in terms of high - temperature stability, by designing a new multi - principal - element alloy to meet the application requirements of higher requirements.