Abstract:Low Density Polyethylene (LDPE) is blended with High Density Polyethylene (HDPE) and three types of Polypropylene (PP) having different melting index (MI), respectively. The compatibility of LDPE/HDPE blends is characterized by using thermal analysis and rheology methods. Differential scanning calorimeter (DSC) traces and rheology methods confirmed their good compatibility. For LDPE/PP blends, the incompatibility has been widely acknowledged in the literature. The distribution of the PP phase in the blend is investigated using polarized optical microscopy (POM). It is found that the phase structure is closely related to the blend composition and the viscosity ratio of the blend components. Extrusion foaming of the blends is conducted using a single extruder fitted with a CO2 gas injection system. Under similar foaming conditions, the compatible LDPE/HDPE blends all generated a uniform cell morphology and achieved roughly the same expansion ratio. Although the incompatible interface is beneficial to cell nucleation, the LDPE/PP blends did not achieve satisfactory foaming performance. To determine the differences in the foaming behavior of the two blends, the viscoelastic properties and diffusion coefficients of supercritical CO2 in the blends, were accurately measured via rheology and magnetic suspension balance (MSB) methods. The results indicate that the viscoelastic properties did not show a dominant role in determining the foaming behavior, by contrast, CO2 diffusion is found to be the key factor affecting foaming performance especially in the case of a co-continuous phase structure. (C) 2016 Elsevier B.V. All rights reserved.

Evaluating melt foamability of LLDPE/LDPE blends with high LLDPE content by bubble coalescence mechanism

Evaluation of LLDPE/LDPE Blend Foamability by in Situ Rheological Measurements and Bubble Growth Simulations

Effect of Melt Viscosity on the Cell Morphology and Properties of Poly(lactic Acid) Foams

Synthesis, characterization and lubricating effect of long chain branched polydimethylsiloxane-g-polyethylene copolymers

Dimensional Stability of LDPE Foams with CO2 + I-C4h10 Mixtures As Blowing Agent: Experimental and Numerical Simulation

Effect of Phase Compatibility on the Foaming Behavior of Ldpe/Hdpe and Ldpe/Pp Blends with Subcritical Co2 As the Blowing Agent

Effect of Viscoelasticity on the Foaming Behaviour of Long-Chain Branched Polypropylene with Different Branching Degrees Analysed by Using Bubble-Growth Modelling

Preparation of high melt strength polypropylene by the reactive extrusion process and its foaming application

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Effects of Blend Morphology on the Foaming of Polypropylene/ Low-density Polyethylene Blends during a Batch Foaming Process

Effect of composition distribution on miscibility and co-crystallization phenomena in the blends of low density polyethylene with conventional and metallocene-based ethylene–butene copolymers

The study of the chemical crosslinked and foamed PP/LDPE

Analysis of Bubble Coalescence and Determination of the Bubble Radius for Long‐chain Branched Poly(ethylene Terephthalate) Melt Foaming with a Pressure Balanced Bubble‐growth Model

Dynamic Rheological Behaviors of Metallocene-Based Ethylene–butene Copolymers and Their Blends with Low-Density Polyethylene

Anti-shrinking foaming of polyethylene with CO2 as blowing agent

Numerical simulation of polypropylene foaming process assisted by carbon dioxide: Bubble growth dynamics and stability

Study on Extrusion Foaming of Polypropylene/Polydimethylsiloxane Blends

Analysis of Bubble Growth in Supercritical CO2 Extrusion Foaming Polyethylene Terephthalate Process Based on Dynamic Flow Simulation.

Investigation of extensional rheological behaviors of polypropylene for foaming

A Real‐time WAXS and SAXS Study of the Structural Evolution of LLDPE Bubble

Characterisation and Modelling of A Melt-Extruded Ldpe Closed Cell Foam