Abstract:One tank type thermocline thermal energy storage (TES) concept is considered as a possible cost optimized solution for the medium temperature industrial applications, e.g., chemical processing, beverages industry etc. However, one of the drawbacks of this TES configuration is higher thermocline degradation at the end of discharging cycles and overall decrease in performance. In current work a new type of combined sensible-latent heat configuration is introduced to counter these issues. The concept of the proposed thermal storage configuration is to use structured sensible heat cheap material with the space between them occupied by encapsulated phase change material (PCM) capsules, forming cascaded layered packed bed along the tank height and the heat transfer fluid flows between them. A comprehensive unsteady numerical model is formulated based on two-phase Schumann model equations to evaluate performance of the each proposed prototypes. The numerical simulations are performed to investigate the effect of combined sensible rod structure and multi-layered PCMs designs on thermocline temperature profiles, exergy outputs, total thermal energy storage, efficiency in the use of total storage capacity, utilization ratio and the proportion of PCM effectively changing phase. The comparative analysis is performed for four different configurations, i.e., single layered sensible rod with PCM (SLSPCM) arrangement and the three cascaded layered sensible rod with PCM (CLSPCM) arrangements. The overall results show that the TES with a volume fraction arrangement of (40%-20%–40%) is performance wise the best configuration followed by (25%-50%–25%) and (10%-80%–10%), respectively. And SLSPCM is the lowest in the row. The analysis presented in the current study shows that the use of multistage PCMs having suitable combination of layer thickness and fusion temperature together with the inclusion of cheaper structured filler material, offer an efficient and cost effective TES alternative.

Monitoring and assessment of the thermomechanical performance of a concrete layer section of a thermocline tank

Thermal insulation for a high temperature molten salt storage tank in a CSP plant

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

Effectiveness of TRC Jackets for the Strengthening of Concrete Columns after Elevated Temperatures: Experimental and Analytical Investigation

Testing of High Thermal Cycling Stability of Low Strength Concrete As a Thermal Energy Storage Material

Thermal fatigue behavior of reinforced concrete column used as heater and energy storage

Key Challenges for High Temperature Thermal Energy Storage in Concrete—First Steps towards a Novel Storage Design

Study on Shear Behavior of Concrete-polymer Cement Mortar at Elevated Temperature

Corrosion of AISI316 As Containment Material for Latent Heat Thermal Energy Storage Systems Based on Carbonates

The impact of concrete structure on the thermal performance of the dual-media thermocline thermal storage tank using concrete as the solid medium

Numerical Characterization of Thermocline Behaviour of Combined Sensible-Latent Heat Storage Tank Using Brick Manganese Rod Structure Impregnated with PCM Capsules

Thermal Performance Analysis of Thermocline Combined Sensible-Latent Heat Storage System Using Cascaded-Layered PCM Designs for Medium Temperature Applications

Development of Thermal Energy Storage Lightweight Structural Cementitious Composites by Means of Macro-Encapsulated PCM

Development And Design Of Composite Cementitious Material At Long-Time Circular Elevated Temperature In Metallurgy Environment

Thermal Performance Analysis of Multi-Layer Thermal Energy Storage Tank Using Different Phase Change Materials

Thermal Performance Evaluation of Combined Sensible-Latent Heat Storage Tank with a Different Storage Medium

Experimental and Numerical Study of CFRP Laminate Strengthened Concrete Beams Under Hygrothermal Environment

Experimental Study on Specific Heat of Concrete at High Temperatures and Its Influence on Thermal Energy Storage

Experimental Study of Thermal-Hydraulic-Mechanical Coupling Behavior of High-Performance Concrete

Experimental and computational optimization of eco-friendly mortar blocks for high temperature thermal energy storage of concentrated solar power plants