Abstract:New avenues for thermal energy storage (TES) need to be investigated due to the lack of competitiveness of concentrated solar power (CSP) technologies. Solutions must be found to replace molten salt tanks which have a major economic impact and are difficult to maintain due to corrosion problems. In this sense, concrete represented an attractive candidate by proving excellent sensible TES in CSP. However, its main phase, made of Portland cement (PC), has significant environmental consequences. The production of PC is known to emit high levels of polluting gases, particularly the CO2. It is estimated to be responsible for between 5% and 7% of the world's CO2 emissions, making it a major contributor to climate change. This work presents greener cementitious materials, made of alkaline cements and hybrids cements, to be used as alternative eco-friendly TES media in CSP plants. An experimental campaign is presented which shows that these eco-efficient materials can have better mechanical properties, than the ordinary PC mortar, when exposed to high temperatures, in addition, can offer improvements of their thermal properties (thermal conductivity or specific heat). Second part of the work is devoted to Finite Element simulations, with the aim to find the best configuration, in terms of selection of materials and geometry, which are more efficient as TES system. The work is showing the following advancements in CSP technology by using alternative eco-friendly binders: the installation volume can be reduced by 17%, compared to a molten salt tank, while the heat exchanger's surface area can be resized by 29%, compared to the reference system using PC. These improvements enable wider variations in CSP operational efficiency and dynamic capabilities and represent important progress towards developing more efficient and sustainable CSP technologies.

Mechanical performance after high-temperature exposure and Life Cycle Assessment (LCA) according to unit of stored energy of alternative mortars to Portland cement

Experimental and computational optimization of eco-friendly mortar blocks for high temperature thermal energy storage of concentrated solar power plants

Characterization of Supplementary Cementitious Materials and Fibers to Be Implemented in High Temperature Concretes for Thermal Energy Storage (TES) Application

LC 3 with microencapsulated phase change materials for reducing embodied and operational carbon

Waste-Based One-Part Alkali Activated Materials

Explorative Study into Alkali-Activated Repair Mortars Using Blast Furnace Slag and Glass Waste

Enhanced thermo-mechanical properties of cementitious composites via red mud-based microencapsulated phase change material: Towards energy conservation in building

Reusing Construction and Demolition Waste to Prepare Alkali-Activated Cement

Preparation, microstructure, performance and mortar application of paraffin/titanium-bearing blast furnace slag phase change aggregate

Use of sustainable Phase Change Material (PCM) in mortars for building energy efficiency

Life-Cycle Assessment and Environmental Costs of Cement-Based Materials Manufactured with Mixed Recycled Aggregate and Biomass Ash

Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposure

Up to 100% Replacement of Natural Materials from Residues: Recycling Blast Furnace Slag and Fly Ash as Self-Leveling Cementitious Building Materials

Lightweight Mortar Incorporating Expanded Perlite, Vermiculite, and Aerogel: A Study on the Thermal Behavior

Multiphysics study on cement-based composites incorporating green biobased shape-stabilized phase change materials for thermal energy storage

Phase change materials embedded in expanded clay aggregates to develop energy storage concrete: A review

Preparation and characterization of innovative cement mortar incorporating fatty acid/expanded graphite composite phase change material for thermal energy storage

Optimal design of ferronickel slag alkali-activated mortar for repair exposed to high thermal load

Mechanical Performance and Durability of Mortar Based on Slag Cement and NaOH-Activated Slag

Mechanical and Durability Properties of Mortars Incorporating Red Mud, Ground Granulated Blast Furnace Slag, and Electric Arc Furnace Dust

Processing of calcium sulfoaluminate eco-cement coatings containing microencapsulated phase change materials