Abstract:To study the safety and stability of the main truss arch structure during the concrete pouring process in a long-span CFST arch bridge, a combination of theoretical analysis and numerical simulation was adopted. The world's longest span CFST arch bridge, the Pingnan Third Bridge (main span 575 m) in Guangxi Province, was taken as an example. Firstly, the basic theory of stability and the concrete pouring technology of the main truss arch structure were summarized. Secondly, a three-dimensional finite element model of the main truss arch structure was established for the concrete pouring stage. Finally, the linearity, stress, and stability of the main truss arch structure during concrete pouring were studied. The results show that both vertical and transverse deflections occurred in the main truss arch structure during concrete pouring from the arch foot to the arch vault; the upper and transverse deflections of the main truss arch structure showed parabolic changes, and the upper and transverse deflections of the midspan section were larger than those of other sections. When concrete was poured near the 1/6 section of the main truss arch structure, the upper and transverse deflections of the middle section of the main truss arch structure peaked; the maximum upper deflection reached 113 mm, and the maximum transverse deflection reached 60 mm. In the process of concrete pouring from the arch foot to the arch vault, the stress in the steel tubes and concrete was constantly changing. Although upper and transverse deflections of the main truss arch structure occurred during concrete pouring, the stress in the steel tube and concrete in the main truss arch structure did not exceed the tensile strength, and the linearity of the main truss arch could be adjusted by retaining the anchor cables, which were set in the erection stage of the main truss arch structure at the 1/6 section of the main truss arch structure. During the concrete pouring process of the various steel tubes of the main truss arch structure, the stability coefficients of the main truss arch structures decreased gradually. During concrete pouring in a single steel tube, the maximum reduction in the stability factor was 21.32%, which occurred in the 1# steel tube, and the minimum decrease in the stability factor was 8.89%, which occurred in the 8# steel tube. The stability coefficients were greater than 4 after this reduction and met the requirements of the design specifications. This study can provide a reference for the optimization design and construction monitoring of long-span CFST arch bridges.

Study on incremental launching construction technology for long span concrete-filled steel tubular arch bridge

Numerical Analysis of Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges

Comparison Study on Stability Behavior Between Steel Pipe Arch Bridge and CFST Truss Arch Bridge

Safety Control Research of Steel U Girder of Composite Bridge with Incremental Launching Construction

Evaluation of Long Multi-Span Steel U-Shaped Girder During Incremental Launching Construction

Finite-element Analysis for Nonlinear Stabilities of Concrete-filled Steel Tubular Arch Bridges

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

SIMULATION ANALYSIS FOR MECHANIC BEHAVIOR OF CONCRETE-FILLED STEEL TUBULAR ARCH BRIDGE DURING THE COURSE OF CORE CONCRETE PUMPING

Study on Incremental Launching Construction Technology of Long-Span Continuous Steel Truss Bridge

Research on the key technology of TIED-arch bridge Incremental Launching Method Construction

Incremental Launching Construction of a Long Span Bridge with Continuous Steel Truss Girder and Flexible Arch

The Incremental Launching Construction Technology of Pontoon Pivot Conversion of Large-span Steel Arch Bridge

ON A CFST TIED ARCH BRIDGE CONSTRUCTED BY INCREMENTAL LAUNCHING METHOD

Simulation analysis and control research of long multi-span composite bridge with incremental launching construction

Walking-Type Bidirectional Incremental Launching and Mid-Span Closure Technology for Steel Box Girders with Long Cantilevers

Stress Measurement and Analysis in Overall Incremental Launching Construction of Beam-arch Composite Arch Bridge

A Construction Technique of Incremental Launching for a Continuous Steel Truss Girder Bridge with Suspension Cable Stiffening Chords

Model Experimental Study on Incremental Launching Construction Method of Large–Span Arch-Girder Combination Bridge

Technical Advances of Temporary Facilities for the Failure Prevention of Large-Span Cantilever Casting Construction of Mountainous Concrete Box-Type Arch Bridges

Key Construction Technology and Monitoring of Long-Span Steel Box Tied Arch Bridge

Study on the safety of the concrete pouring process for the main truss arch structure in a long-span concrete-filled steel tube arch bridge